R717 Mobile Hotspot User Guide
Welcome! This booklet helps you get started with your new Franklin Wireless R717 Mobile Hotspot. For more help getting up and running with your new device, please contact Southern Linc. Your R717 Mobile Hotspot micro-USB Charging Port LCD Screen Power/Wake Device Navigation Button See below for details on everything you will find in the box for yourR717.
Get Started The following topics give you all the information you need to set up your device and wireless service the first time. Device Layout The following illustration outlines your device's primary external features and buttons.
Part Description Display View device status and information SIM card slot Install the SIM card. AC Charging micro USB port Connect the micro USB cable for charging. Battery cover Remove the battery cover to remove or insert the battery or SIM card. Settings Reset button Press to reset your device to its default settings. Power (Menu) button c Long press to toggle power on or off.
1. Press and hold the Power key to turn off the device before inserting or removing the SIM card. 2. Remove the battery cover and Open the SIM card cover. 3. Insert the SIM card gently with gold chip facing downward (Remove the SIM card by gently pressing down and sliding outwards.
4. Close the SIM card cover. Battery Insert the Battery 1. Align the contacts of the battery with the contacts in the device. 2. Attach the battery cover.
Follow these instructions to charge your device's battery using the included AC adapter. • Charge Using the AC Adapter • Use the supplied AC adapter. 1. Plug the AC adapter into an electrical outlet. The socket-outlet shall be installed near the equipment and shall be easily accessible. The indicator light on the power button illuminates red when charging starts. The light turns green when the battery is fully charged. Fully charging a battery may take up to three hours. 2.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Turn Your Device On and Off The instructions below explain how to turn your device on and off, or to restart your device if it cannot be powered on and off using the Power button. 1. Turn Your Device On 2. Press and hold the Power button until the device displays "Welcome". 1. Turn Your Device Off 2.
Set up and use your Hotspot – Quick Steps 1. Insert the Battery • Remove the back cover using the thumb catch on the bottom edge of the hotspot. • Align the battery's contacts with those inside the battery compartment and gently press down until the battery is seated. • Replace the back cover. 2. Charge the Battery • Insert the small end of the USB cable into the micro-USB charging port on the right side of the hotspot. • Plug the charging adapter into a standard AC power outlet. 3.
Important Safety Information This booklet contains important operational and safety information that will help you safely use your hotspot. Failure to read and follow the information provided in this booklet may result in serious bodily injury, death, or property damage. General Precautions There are several simple guidelines to operating your hotspot properly and maintaining safe, satisfactory service. • Avoid exposing your hotspot and accessories to rain or liquid spills.
• Don’t attempt to disassemble or short-circuit the Battery. • The battery may need recharging if it has not been used for a long period of time. • It’s best to replace the battery when it no longer provides acceptable performance. It can be recharged hundreds of times before it needs replacing. • Don’t store the battery in high temperature areas for long periods of time.
• Do not operate your device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, your device MUST BE POWERED OFF. When operating, your device can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground. Your device may be used at this time if allowed by airlines. • The driver or operator of any vehicle should not operate the device while in control of a vehicle.
● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help.
