Use and Care Manual

01/15
www.southlandpowerequipment.com
HOW TO GET STARTED
Read operators manual before operating this unit. Failure to follow
directions could result in serious injury.
1
Assure the chute deector is installed and
secured with wing knobs.
2
Place unit on level surface.
3
Check engine oil quantity.
4
Check gasoline quantity.
5
Throttle to low speed position.
6
Choke full on.
7
Slowly but rmly pull starter handle.
8
Choke full off when engine starts.
9
Throttle to high speed position.

Summary of content (4 pages)