Product Manual

ENG - 14
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2015 MAT Engine Technologies, LLC
Assembly
• Save these instructions
Chute Deflector (Fig. 2)
A
WARNING
DO NOT operate chipper shredder unless the chute deflector is
installed and secured with wing knobs.
1. Align hole in discharge chute (12) with holes on chute deflector (10).
9
14
15
12
16
Figure 2CFigure 2BFigure 2A
10
14
13
41
2. Slide bolt (13) with washer (14) through sleeve (41), chute deflector (10), discharge
chute (12) and second sleeve (41). Secure with other washer (14) and nut (15).
Tighten using a 10 mm open end wrench or socket. Ensure deflector pivots freely
with no resistance.
3. Close the chute deflector (10). Ensure the discharge chute hooks onto post (16).
Secure chute deflector with wing knobs (9).
Debris Bag (Fig. 3)
B
1. Place the opening of the bag (11) completely over the chute deflector (10).
2. Ensure wing knobs (9) and side tabs (40) are completely covered by the bag and
drawstring.
3. Depress the cord lock (17) and slide it down the drawstring until the bag is secured
in place around the chute deflector. Release cord lock to lock drawstring in place.
11
9
17
Figure 3
10
40
If you need assistance or find any parts
missing, CALL TOLL FREE: 1-800–737-2112