R 2.4GHz Clock Radio Cordless Telephone with Call Waiting Caller ID CALLS DEL TALK FLASH 2 ABC 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ # 0 OPER REDIAL For immediate answers to your questions regarding operation, missing parts or installation, call: 3 DEF 1 4 GHI CH VOL/RING ON F /OF T E N STOP - DON'T TAKE ME BACK TO THE STORE. LOOK - FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER. LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.
PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BEFORE USE. IMPORTANT SAFETY INSTRUCTIONS Congratulations! WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: You have purchased a 2.4GHz Clock Radio Cordless Telephone with Call Waiting Caller ID that has been manufactured to the highest standards of SOUTHWESTERN BELL FREEDOM PHONE R Retail Sales.
Safety Instructions for Batteries Handset Battery Caution Handset Battery Pack CAUTION: CAUTION: Use only a Southwestern Bell Freedom Phone R approved battery pack in the handset of your GH3060 Cordless Telephone. To reduce the risk of fire or injury, always do the following when replacing, discarding or charging batteries. When handling the batteries, be careful not to short the battery with conducting materials such as rings, bracelets, and keys.
Southwestern Bell Freedom Phone GH3060 Cordless Telephone Handset Diagram Contents HANDSET CONTROLS: The diagram below shows the controls of the GH3060 Handset. Subject Page Subject Page Safety Instructions......................................2 Handset Battery Pack.................................3 Handset Battery Caution............................4 Handset Diagram........................................6 Base Diagram.............................................7 Traits of Cordless Telephones......
Traits of Cordless Telephones Base Diagram BASE CONTROLS: This diagram shows the controls of the GH3060 Base. PAGE PAGE B. The usable range of the cordless handset away from the base is dependent upon many factors. The telephone base is like a radio transmitter in that it transmits telephone line signals via radio waves to the handset. Therefore, the location of the base is important in order to maximize the usable range.
Installation Installation (Cont.) Box Contents Before installing your phone, check the shipping carton to be sure you have the following: Base Unit Long Telephone Line Cord Handset with Rechargeable Battery Quick Installation Guide DC Adaptor with Cord Owner's Manual Notes: a. Keep the shipping carton and packaging, in case you need to transport your phone. b. If there is visible damage, do not use this equipment. Contact your shipping agent or return the telephone to the place of purchase. 1.
Installation (Cont.) Caller ID Setup/Telephone Operation To Replace Batteries: Caller ID Setup 1. Remove battery cover. To Set Handset Display Contrast Tone/Pulse Switch To Set Area Code The GH3060 will operate on tone or rotary systems. Note: In order that the Caller ID Redial feature works properly, you must set your local area code. 1. After installing the FULLY CHARGED handset battery, the handset display will light and will show "AREA CODE?" 1.
Telephone Operation (Cont.) When the handset is not in the base, only a handset having the identical security code and operating on the same channel can access the base and use your phone line. When the handset is in the base, no other handset, even those having the identical security code and operating on the same channel, can access the base and use your line. Digital security coding will also eliminate the "false" ringing associated with cordless telephones not equipped with this feature.
Telephone Operation (Cont.) Memory Features Your GH3060 is equipped with 10 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each of the memory locations 0 through 9, by following the steps outlined below. A record of the numbers to be speed-dialed may be kept on the speed dialing numbers index on page 33. To Program Frequently Called Numbers 1.
Telephone Operation (Cont.) Telephone Operation (Cont.) 1. Press the "MEM" button on the handset. To Dial a Number Stored in Memory WHEN THE TALK BUTTON IS OFF: 2. Press the desired memory location (0 through 9). 3. The number you programmed will be automatically dialed. 1. Press the "MEM" button and the location number on the handset, and the display will show "MEM x" with "x"representing the memory location that is currently displayed. 3. Press the "CALLS" button.
Telephone Operation (Cont.) Telephone Operation (Cont.) -RINGER SWITCHBASE ON HANDSET OFF CRADLE When The "VOL/RING" button is pressed, the receiver volume will increase to maximum (level 3) and then back down and decrease to minimum (level 1) in a repeated cycle.
Alarm Operation Alarm Operation/Radio Operation Once the unit is powered on, the clock display will show 12:00AM . You can utilize the clock and alarm time setting as follows: Before setting, you can select a comfortable contrast and back light. When the unit is in the standby mode, press the ENTER button. The LCD of the base will show CONTRAST, you can or select the desired level by pressing button. Then press the ENTER button to confirm.
Radio Operation Radio Operation 2. Press the FUNCTION button, the display will show "FM". 3.You can select "FM" or "AM" band by pressing the or button, then press the ENTER button to confirm. 4. Press the or button to select a station which you want to save. 5. Press and hold the SET button about one second. "PROG" icon will flash on the LCD display. MHZ FM SLEEP FUNCTION PROG 3. You can select "FM" or "AM" band by pressing the or button, then press the ENTER button to confirm. AM FM 4.
Caller ID Operation (Cont.) Caller ID Operation Receiving a Call 1. After the first ring, the caller`s name and telephone number will be displayed on the handset screen. IMPORTANT: You must subscribe to Call Waiting and Call Waiting Caller ID service from your local telephone company in order to receive Call Waiting Caller ID information To Store a Caller ID Record to Speed Dial Memory Note: You can store a Caller ID record from the handset to Speed Dial Memory. Reviewing Calls 1.
Caller ID Operation (Cont.) 4. 10 digits with a 1: Since the 1 prefix will be added automatically when dialing a 10 digit number, simply press the handset "CALLS" button ONCE to make your call. If your area code requires that you add 1 and your area code, even if the call is within the same area code, then you must reprogram your GH3060 to another 3-digit "fictitious" area code. The "1" prefix will be added before the 10 digit number and your long distance call will be dialed.
Answers to Commonly Asked Questions Troubleshooting Guide Q. I can't get a dial tone. What do I do? A. Your phone may have lost its digital security code and needs to be reset. Refer to the "To Reset" unit procedure on page 20 If you have followed the instructions in this manual, and have difficulty operating your Southwestern Bell Freedom Phone R Cordless Telephone, locate the PROBLEM in the left column below.
Troubleshooting Guide (Cont.) Troubleshooting Guide (Cont.) PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Can't make outgoing calls. Tone/Pulse switch is not set correctly. Set the Tone/Pulse switch to proper position for your type of service. The digital security code has been lost. Reset the security code by returning the handset to the base. The base and handset battery contacts are not in contact with each other.
Service Product Care A. Avoid putting cordless phones near heating appliances and devices that generate electrical noise (motors, fluorescent lamps, etc.). E. Retain the original packaging in case you need to ship the phone at a later date. Additional Information B. Avoid rough treatment of the phone by placing the handset gently into the base when hanging up. Avoid dropping the handset. C. Clean your cordless telephone only with a soft cloth slightly dampened with water or mild hand soap.
FCC Wants You to Know FCC Wants You to Know This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of the bottom of this equipment is a label that contains, among other information, a product in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.
Limited Warranty This Southwestern Bell Freedom Phone R is warranted to the original purchaser to be free from defects in materials and workmanship under normal installation, use, and service for a period of one(1) year from the date of purchase as shown on the purchaser's receipt.
