User's Manual

ManualsBrandsSouthwing ManualsAudio EquipmentBluetooth Wireless Headset

ENGLISH

USER GUIDE

Note:

Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the

headset.

INTRODUCTION

Thank you for choosing a SH110 Bluetooth® headset from SouthWing. This user guide

provides all the information you will need to use and care for your product. All relevant

information regarding your SouthWing product can be found in the support section of

our website: www.southwing.com

Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and licensed to SouthWing.

1. CHARGING THE HEADSET

You will need to charge the battery of your headset. To do so, follow these steps:

1. Plug the power supply into a power outlet.

2. Plug the connector of the power supply into the USB Charging Socket [1]. The

Indicator Light [2] will turn red to indicate the headset battery is charging.

3. Once the Indicator Light [2] turns off, the headset is fully charged and can be

removed from the power supply.

Please Note:

· The headset will not function while charging.

· If the Indicator Light [2] remains off while charging, the battery is already fully charged and does not

require further charging.

· To maximize battery life, do not charge the headset for extended periods of time.

· Full battery capacity will be achieved after two or three full charge/discharge cycles.

· When your battery is empty, it takes up to three hours to completely charge your headset.

2. PAIRING THE HEADSET

Auto-pairing

For added convenience, your headset has an auto-pairing function so that when you turn

the headset on for the first time, it is already in pairing mode. The Indicator Light [2]

will flash red and blue alternatively and a series of high tones can be heard. Follow

these steps to pair the headset with your mobile phone:

1. Put the mobile phone into pairing mode (reference your phone user manual). Ensure

that the mobile phone is no more than 3 feet (1meter) away from the headset.

2. Select the headset name “SouthWing SH110” from the list

3. Enter the PIN number: 0000

Now the headset and your mobile phone are paired and ready for hands free

communication through the Bluetooth connection.

In case it is needed to re-connect the headset to the phone (Bluetooth connection lost)

press the Multi-function button once.

Normal pairing

You will need to follow the steps below if you want to pair your headset with another

mobile phone.

Summary of content (7 pages)

PAGE 1
ENGLISH USER GUIDE Note: Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the headset. INTRODUCTION Thank you for choosing a SH110 Bluetooth® headset from SouthWing. This user guide provides all the information you will need to use and care for your product. All relevant information regarding your SouthWing product can be found in the support section of our website: www.southwing.com Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and licensed to SouthWing.
PAGE 2
1. Ensure the headset is off. 2. Put the headset in pairing mode by pressing and holding the Multi-function button [2] for about 5 seconds until the Indicator Light [2] flashes red and blue alternatively and a series of high tones are heard. 3. Complete the normal pairing process by following steps 1, 2 and 3 in the auto-pairing section. 3. WEARING AND CARRYING THE HEADSET Selecting an ear bud The headset comes with different sized comfortable ear buds, try and select the one that best fits your ear.
PAGE 3
Changing the volume To increase the volume during a call, press Vol+ button [3]. To decrease the volume, press the Vol- button [4]. The headset will remember previous volume settings each time it is turned on. To mute / reactivate the microphone press Vol+ and Volsimultaneously for 1 second. Initiating a call from your mobile phone Dial the number as usual with your phone. If your headset is on and the phone has been correctly connected, your phone will transfer the call to your headset.
PAGE 4
• Try moving the phone and Headset closer together during pairing. • Make sure that the mobile phone is in the correct Bluetooth mode. • Some electrical devices such as microwave ovens create a noisy electrical environment making it difficult for the Headset to communicate with the phone. Try moving away from such devices and try again. Pairing has succeeded but calls are not heard • Make sure that your phone is switched on and ready to connect to the Headset.
PAGE 5
· Usage of this product while driving may reduce your ability to react to road conditions. · Be aware that using a wireless headset while driving is illegal in certain countries. Therefore, you should check the local laws before using the product while driving. · As this product contains parts which may cause injury if consumed, keep it out of reach of children. · Use only the power supply or accessories approved by SouthWing.
PAGE 6
7. DECLARATION OF CONFORMITY Hereby, SouthWing S.L. declares that this Bluetooth Headset is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For additional information please visit: http://www.southwing.com This product has no usage limitations in the EU. This product follows the WEEE (Waste Electrical and Electronic Equipment Requirements). 2002/96/EC (FOR USA VERSION) 7.
PAGE 7
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.