User's Manual

Changing the volume
To increase the volume during a call, press Vol+ button [3]. To decrease the volume,
press the Vol- button [4]. The headset will remember previous volume settings each
time it is turned on. To mute / reactivate the microphone press Vol+ and Vol-
simultaneously for 1 second.
Initiating a call from your mobile phone
Dial the number as usual with your phone. If your headset is on and the phone has been
correctly connected, your phone will transfer the call to your headset.
Initiating a Call with Voice Dialing
To voice dial press briefly the Multi-function button [2] and wait for the feedback tone
from the phone. Then speak the name of the person you wish to call.
Note: your phone must support voice dialing and you must first record voice tags into your phone
associated to phone numbers (please check your phone manual for details)
Redial the last called number
Press briefly the Multi-function button [2] twice; the last called number will be
automatically dialed.
Ending a call
Press the Multi-function button [2] briefly during a call and the call will be ended.
Transferring a call from the Headset to the mobile
During a call, you may wish to transfer the call to your mobile, to do so press the Multi-
function button [2] twice. To transfer the call back to the headset repeat the same
command.
Battery Life
To conserve battery life, your headset features an auto-sleep function. This function
switches the headset off after 12 hours of inaction. Once your headset has entered auto-
sleep, it can be switched on again normally.
When the battery is low the headset will produce an audible warning tone sequence
every 30 seconds, please charge it immediately as you have only few minutes of talk
time left.
* The features marked with an asterisk will only work with Bluetooth phones which support the Hands-
free profile. Today, most Bluetooth phones support this profile.
5. TROUBLESHOOTING
Problem Suggestions
The Headset will not turn on
• The Headset battery may be empty
• Try recharging the Headset.
Pairing is unsuccessful