User's Manual

2
2 Enter the PIN number: 1111. If pairing is successful, the Indicator Light [2] will begin flashing every 3 seconds.
Normal pairing
You will need to follow the steps below if you want to pair your Headset with another mobile phone. You will be able to
pair your Headset with up to 3 devices.
1. Ensure the Headset is off
2. Press and hold the On/Off Button [3] for about 5 seconds until the Indicator Light [2] flashes twice every second (you will also
hear a series of high tones)
Then complete normal pairing process by following point 1 and 2 of the auto-pairing section above.
3. Wearing and carrying the Headset
You can wear your Headset on either ear and carry it in different ways using the rotating Multi-function Arm [8].
Wearing the Headset without the Ear Hook
You can wear the Headset without using the Ear Hook. To do so:
1. Rotate the Multi-function Arm [8] downwards, until it stays in your ear like a wired headset cable extension
2. Gently place the Speaker [6] into your ear canal
3. Finally find the most comfortable position by rotating the Headset forward and backward
Wearing the Headset with the Ear Hook
The Ear Hook may also be used for maximum comfort. To mount the ear hook, rotate the Multi-function Arm [8] upwards and
slide it inside the Ear Hook [9] jack. To place it on your ear follow these steps:
1. Rotate the Ear Hook [9] slightly forwards
2. Gently place the Speaker [6] slightly into your ear canal
3. Rotate the Ear Hook [9] backwards and adjust it behind your ear
4. To switch from one ear to the other, simply rotate the Multi-function Arm [8] downwards and rotate the Ear Hook [9] to the
opposite side
Clipping your Headset to your clothes
The Multi-function Arm can also be used to carry your Headset in several convenient ways (Ear Hook not mounted). To clip it
to your clothes do the following
1. Rotate the Multi-function Arm [8] to the same direction of the microphone [7]
2. Use the Multi -function Arm [8] and Headset Body as a clip to attach the Headset to your clothes
Using your Headset Cord to carry your Headset
The Headset Cord [10] can also be used to carry your Headset with your mobile phone (Ear Hook not mounted). To attach your
Headset to the Headset Cord [10] follow these steps
1. Rotate the Multi-function Arm [8] until it is in opposite direction of the Headset microphone [7]
2. Attach the Multi-function Arm [8] to the Headset Cord [10] jack
Changing colour covers
Your headset comes with interchangeable colour covers to suit your style. To change a colour cover, place your thumbnail on the
cover end, close to the microphone and pull it out gently. Now you can fit the new colour cover.
4. General Usage
Turning the Headset on and off
To turn the Headset on, press and hold the On/Off Button [3] for about 2 seconds until a series of tones is heard. The Indicator
Light [2] will flicker for 1 second and start flashing.
To turn the Headset off, press and hold the On/Off Button [3] for about 2 seconds until a series of tones is heard. The Indicator
Light will flash, before turning off.
Changing Volume
To increase the volume, with the Headset on, press Vol+ Button [4]. To decrease the volume, press the Vol- Button [5]. The
Headset will remember all volume settings even when it is switched off.
Accepting/rejecting
*
a call
When the phone rings (ring tone can be heard in Headset), briefly press the Push4
TM
Button [2] once to accept the call. Press and
hold the Push4
TM
Button [2] for 1 second to reject the call.
Initiating a call from your mobile phone
*
The features marked with an asterisk will only work with Bluetooth phones which support the Hands-free
profile. Today, most Bluetooth phones support this profile.