User's Manual

3
Dial the number as usual with your phone. If your Headset is on and the phone has been correctly paired, it will transfer the call
to your Headset.
Initiating a call with voice dialling
You may be able to initiate the voice dialling function from your Headset (your phone will need to support voice dialling and
voice tags need to be entered). To activate, briefly press the Push4
TM
Button [2]. You will then be able to speak the name of the
person you wish to call, resulting in the call being initiated.
Ending a call
Press the Push4
TM
Button [2] briefly during a call and the call will be ended.
Disconnecting from the phone
*
You may wish to disconnect the Headset from the phone in order to reduce battery consumption. To do so, press the Push4
TM
Button 3 times on the Headset when it is not in an active call. If you want to pick up a call, you first need to re-connect the
Headset. To do so, press the Push4
TM
Button once again on the Headset.
Battery life
To conserve battery life, your Headset features an auto-sleep function. This function switches the Headset off after 4 hours of
inaction. Once your Headset has entered auto-sleep, it can be switched on again normally.
When the battery has only 10% charge remaining, the Headset will produce an audible warning tone sequence every time a call is
ended.
Resetting your Headset
Should your Headset stop responding, try charging it for a few seconds. Your Headset should now function again as normal.
5. Push4
TM
call
*
Your Headset can be configured with a specific Push4
TM
call function. With the Headset on, press and hold the Push4
TM
Button
[2] for 1 second to call directly to the configured number or phone service.
In some cases, you can use this function as your favourite number. To do so, you will first need to save your favourite number
on the Headset. This can only be done when you have received a call (A) from this same number into your Headset (not made
through a hidden call). Once this received call has ended (B), press and hold both Vol+ [4] and Vol- [5] buttons for 3 seconds,
until you hear a series of tones. The number from the last received call will be stored.
Now you can make a direct call to this number at any time just by pressing and holding the Push4
TM
Button [2] for 1 second.
6. Extended Menu
To activate the extended menu functions, press the Vol+ [4], Vol- [5] and Push4
TM
[2] Buttons until the Indicator Light flashes 3
times per second for 3 seconds (a series of 10 beeps will be heard). Do the same to return to the main menu (all the settings of
extended menu functions will be lost). With the extended menu functions you can do the following:
Muting the microphone
During a call, briefly press the Push4
TM
Button[2] twice. A tone will be heard every 2 seconds during the call to remind you that
the microphone is muted. Two additional presses of the Push4
TM
Button will reactivate the microphone.
Transferring a call to the phone
*
Press the Push4
TM
Button 3 times during a call to transfer the call to the mobile phone. Pressing the Push4
TM
Button [2] once
again will transfer the call back to the Headset.
Last number redialling
*
Press Push4
TM
Button twice to make your phone redial the last number called.
Battery Level Indicator
You can check the battery level at any time. With the Headset switched on, if you press the Push4
TM
Button 4 times, you will
repeatedly hear a battery level indication:
o 4 tones for a remaining talk-time over 4 hours.
o 3 tones for a remaining talk-time around 3 hours.
o 2 tones for a remaining talk-time around 2 hours.
o 1 tone for a remaining talk-time between ten minutes and approximately 1 hour and a half.
o A warning tone (high-low -high) will sound when remaining talk-time falls below ten minutes.
*
The features marked with asterisk are only possible with Bluetooth phones supporting the Bluetooth® Hands-
free profile. Today, most Bluetooth phones support this profile.