Product Brochure
Service Entrance Cable, Type SE, Style SER and SE Stype U. Service Entrance Cable, 600 Volt.
Individual Conductors Rated XHHW-2 or THHN/THWN. Jacket and Individual Conductors Sunlight
Resistant.
Southwire® Type SE, service entrance cable is primarily used to convey
power from the service drop to the meter base and from the meter base to the
distribution panelboard; however, the cable may be used in all applications
where Type SE cable is permitted. SER may be used in wet or dry locations
at temperatures not to exceed 90°C. Voltage rating is 600 volts.
Southwire® Type SE cable complies with:
•
ASTM- All applicable standards
•
UL Standard 44 for XHHW-2 conductors
•
UL Standard 83 for THHN/THWN conductors
•
UL Standard 854
•
Federal Specification A-A-59544
•
National Electrical Code, NFPA 70. 2011 Edition
•
RoHS/ REACH
Southwire® Type SE cable is constructed with sunlight resistant Type XHHW-
2 conductors or Type THHN/THWN conductors. Copper conductors are
annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed
with sunlight resistant gray polyvinyl chloride (PVC). Available as 1 conductor
with a concentric ground, 2 conductor with a round or concentric ground, or 3
conductor with a bare ground. SE cable is jacketed with gray sunlight
resistant polyvinyl chloride (PVC).
Copper Service Entrance (SE) Cable
APPLICATIONS
STANDARDS & REFERENCES
CONSTRUCTION