Product Brochure
Nonmetallic-Sheathed Cable. 600 Volt. Copper Conductors. Color-Coded Jacket. Four Conductor
Available With Two Neutrals. SIMpull
®
Jacket Designed for Easier Pulling.
Southwire
®
Romex
®
Brand SIMpull
®
NM-B (nonmetallic-sheathed) cable may be used for
both exposed and concealed work in normally dry locations at temperatures not to exceed
90°C (with ampacity limited to that for 60°C conductors) as specified in the National
Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for
outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or
tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is
600 volts.
Southwire Romex
®
Brand SIMpull
®
NM-B cable complies with the following:
•
Listed per UL Standard 719
•
UL 83 (Conductor Construction)
•
ASTM B-3 and B-8
•
Federal Specification A-A-59544
•
National Electrical Code, NFPA 70
•
REACH/RoHS Compliant
Southwire Romex
®
Brand SIMpull
®
NM-B cable is manufactured as 2, 3, or 4 conductor
cable, with a bare ground wire. Copper conductors are annealed (soft) copper. Stranded
conductors are compressed stranded. Conductor insulation is 90°C-rated polyvinyl
chloride (PVC), nylon jacketed. Romex
®
Brand SIMpull
®
NM-B cable is designed for
easier pulling, resulting in easier installation. The cable jacket is color-coded for quick size
identification; White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG, and Black - 8 AWG
and 6 AWG.
©2018 Southwire Company, LLC. All rights reserved. ®Registered Trademark and ™Trademark of Southwire
Company, LLC. One Southwire Drive, Carrollton, GA 30119, USA
6/13/18 Rev 0
APPLICATIONS
STANDARDS & REFERENCES
CONSTRUCTION
Romex
®
Brand SIMpull
®
Indoor Wire Copper NM-B Cable