Cut Sheet

SIMpull

Coil PAK

WIRE PAYOFF

REVOLUTIONIZING THE WAY YOU INSTALL CIRCUIT WIRE

VISIT US AT SOUTHWIRE.COM TO LEARN MORE

*Registered Trademark & ™Trademark of Southwire Company, LLC.

CONNECT WITH US:

WE LISTENED:

Moving, setting up, and pulling circuit wire spools can be physically challenging. Spools are bulky, easily breakable, and often result in partial

lengths that are difﬁcult to store or become scrap. This leads to an increase in physical effort, manpower, and material required for the job.

SOLUTION:

Work smarter with the SIMpull

Coil PAK

Wire Payoff by reducing the physical effort associated with material handling, setup, and pulling

compared to traditional spools, increasing both safety and productivity on the job.

BENEFITS:

• Stationary package design reduces pulling effort.

• SIMpull NoLube

jacket further reduces pulling tension.

• Designed to help reduce potential lifting/handling/pulling injuries.

• Space saving, multi-wire Coil PAK

payoffs with striped neutrals for greater efﬁciency and less handling.

• No more broken spools or spool over-turn.

SIMpull

NoLube

wire jacket

Incorporated payoff feature

for less setup

Large selection of sizes & colors

in full size and mini versions for

more versatility

Available in SIMpull

THHN

/THWN-2 cable

Package fully encases

& helps protect wire

Single, 2-wire, 3-wire and 4-wire

CoilPAK

payoffs available*

Built-in handle for easy carrying

*Some constructions subject to minimum runs.

PAGE 1
SIMpull Coil PAK WIRE PAYOFF ® TM REVOLUTIONIZING THE WAY YOU INSTALL CIRCUIT WIRE WE LISTENED: Moving, setting up, and pulling circuit wire spools can be physically challenging. Spools are bulky, easily breakable, and often result in partial lengths that are difficult to store or become scrap. This leads to an increase in physical effort, manpower, and material required for the job.
PAGE 2
CIRCUIT COMPARISON: 7 CONDUCTOR 10 STRANDED CU THHN NEW SIMpull ® WAY OLD WAY MATERIAL HANDLING & SCRAP VS. • SIMpull CoilPAK Wire Payoffs less than 50lbs • Built in handle for carrying and loading • Multi-wire CoilPAK Payoffs make it even easier to handle, set up and pull • 96 lbs per spool • Bulky and awkward to handle VS. EFFORT TO PULL WIRE • 58 lbs of pulling tension • 18 lbs of pulling tension 85' 4-90º BENDS EFFORT TO PULL WIRE OUT OF CONDUIT VS. • Average pulling tension – 30.