Product Brochure

14 AWG through 2 AWG THHN/THWN Insulated Singles Wrapped in Moisture-Resistant, Flame-Retardant Paper. 16
AWG Aluminum Bond Wire. UL Listed. 600 Volts. Rated VW-1. Lightweight Aluminum Interlocked Armor.
Southwire Armorlite
®
Type AC Cable is suitable for use as follows:
•
Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-
residential buildings.
•
Dry locations only.
•
Fished or embedded in plaster.
•
Concealed or exposed installations.
•
Environmental air-handling spaces per NEC 300.22(C).
•
Installation in cable tray and approved raceways.
•
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D)
& 645.5(D)(2).
Southwire Armorlite
®
Type AC Cable meets or exceeds the following requirements:
•
UL 4
•
UL 83
•
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
•
Federal Specification A-A59544 (formerly J-C-30B)
•
NFPA 70 (National Electrical Code), Article 320
•
Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems
•
REACH/RoHS-2 (Chemical Limit) Compliant
Southwire Armorlite
®
Type AC Cable is constructed with soft-drawn copper, Type THHN insulated
conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering.
Aluminum interlocking armor is applied over the assembly. A 16 AWG aluminum bond wire is placed
inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length.
Armorlite®
Type AC
APPLICATIONS
STANDARDS & REFERENCES
CONSTRUCTION