Submittal Sheet

1-855-798-6657 | SOUTHWIRETOOLS.COM
©2020 Southwire Company, LLC. All rights reserved.
*Registered Trademark & ™Trademark of Southwire Company, LLC.
EMT PULL ELBOW CONNECTORS
½" – 1-¼"
CERTIFICATIONS/RATINGS:
E-FILE #: E474447
Southwire
®
SIMPush
™
EMT pull elbow connectors are used for joining
UL-approved thin wall EMT to form a 90° bend connecting to a box.
Project Name:
Contractor:
Address:
Stock # Model # Trade Size
Quantity Per
Box
H (in.)
A
W (in.)
B
L (in.)
C
Associated Removal
Tool Model #
Removal Tool
Included
CONTRACTOR PACK
65072202 E-PB-050WT 1/2" 25 2.51 2.522 1.105 E-RT-1P YES
65072302 E-PB-075WT 3/4" 15 2.981 2.882 1.282 E-RT-1P YES
65072402 E-PB-100WT 1" 7 3.677 3.622 1.6 E-RT-P2 YES
65072502 E-PB-125WT 1-1/4" 6 4.515 4.378 2.09 E-RT-P2 YES
DFTMPE050, DFTMPE075,
DFTMPE100, DFTMPE125
FEATURES:
• Corrosion-resistant copper-free diecast aluminum construction
• Provides continuous ground
• Internally coated with lubricating grease
• Tested to 100 removal cycles for reuse
• Locking teeth are constructed from zinc-plated steel
• Body door is domed aluminum construction with zinc-plated steel screws
• Includes zinc-plated steel lock nut
QUICK RELEASE RING
ZINC PLATED STEEL
GRIP RING HOLDS
300
+
ft/lbs OF
PULL FORCE
GASKET PROVIDES
IP66, WATERTIGHT SEAL
HOUSING MADE OF
CORROSION RESISTANT
COPPER FREE ALUMINUM
OR UV RESISTANT PVC
INTERNAL CONDUIT STOP
*N/A on EMT Dry location
TO REMOVE THE SIMPush
TM
FITTING, SIMPLY SLIDE
THE REMOVAL TOOL ONTO
THE COLLAR AND PULL
FITTINGS
SUBMITTAL SHEET
A
C
NOTE:
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN INCHES 1.
DIMENSION SYMMETRYCAL AROUND CENTER LINE 2.
REMOVE ALL SHARP EDGES AND BURRS 3.
O-RING SEALS MUST BE LUBRICATED USING DOW CORNING 111DISTRUBUTED EVENLY ACROSS THE O-RING SURFACE EQUATING 4.
TO 6 - 8 DROPS (0.4 - 0.5 GRAMS)
FINISHING PRODUCT JUST IN SHOWN AREA , OUTSIDE [ 0.02 mm EQUIVALENT TO 20µm, INSIDE [ 0.008 mm EQUIVALENT TO 8 µm ] 5.
REVISIONS
ZONE REVISED BY. DESCRIPTION DATE APPROVED
- - Initial Drawing - -
A A
B B
4
4
3
3
2
2
1
1
See mfg DW
DO NOT SCALE DRAWING
DFT-MPE
SHEET 1 OF 1 SCALE: 1:1
REV
Part No
B
SIZE
Description:
NAME DATE
Eng. Appr.
Eng. Chck
Drawn
Material:
.XX = 0.01
.XXX = 0.005
FRACT. = 1/64
ANGLES = 1/2
125
REMOVED ALL BURRS AND
SHARP EDGES R. 0.010"
CHAMFER MAX
TOLERANCES:
PROPRIETARY AND CONFIDENTIAL
THIS DRAWING AND THE INFORMATION
HEREIN CONTAINED IS THE PROPERTY OF
QUICK FITTING, INC. AND IS SUPPLIED
UPON THE EXPRESS CONDITIONS THAT
THE SAME BE RETURNED TO QUICK
FITTING, INC. UPON REQUEST. ALL
INFORMATION HEREIN CONTAINED IS TO
BE TREADED AS SECRET AND
CONFIDENTIAL. NO REPRODUCTION OF
THIS DRAWINGS OR ANY PART THEREOF
SHALL BE MADE WITHOU THE WRITTEN
PERMISSION OF QUICK FITTING, INC.
ACCEPTANCE OF THIS DRAWING SHALL
BE DEEMED ACCEPTANCE OF THE
FOREGOING CONDITIONS.
Depends on
configuration
N. Ochoa
11-18-2019
N. Ochoa
L. Ochoa
11-18-2019
11-21-2019
Designed
L. Ochoa
11-21-2019
DFT Male Pulling Elbow Assembly
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES WITH
MILLIMETERS
WEIGHT:
B
A
C
NOTE:
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN INCHES 1.
DIMENSION SYMMETRYCAL AROUND CENTER LINE 2.
REMOVE ALL SHARP EDGES AND BURRS 3.
O-RING SEALS MUST BE LUBRICATED USING DOW CORNING 111DISTRUBUTED EVENLY ACROSS THE O-RING SURFACE EQUATING 4.
TO 6 - 8 DROPS (0.4 - 0.5 GRAMS)
FINISHING PRODUCT JUST IN SHOWN AREA , OUTSIDE [ 0.02 mm EQUIVALENT TO 20µm, INSIDE [ 0.008 mm EQUIVALENT TO 8 µm ] 5.
REVISIONS
ZONE REVISED BY. DESCRIPTION DATE APPROVED
- - Initial Drawing - -
A A
B B
4
4
3
3
2
2
1
1
See mfg DW
DO NOT SCALE DRAWING
DFT-MPE
SHEET 1 OF 1 SCALE: 1:1
REV
Part No
B
SIZE
Description:
NAME DATE
Eng. Appr.
Eng. Chck
Drawn
Material:
.XX = 0.01
.XXX = 0.005
FRACT. = 1/64
ANGLES = 1/2
125
REMOVED ALL BURRS AND
SHARP EDGES R. 0.010"
CHAMFER MAX
TOLERANCES:
PROPRIETARY AND CONFIDENTIAL
THIS DRAWING AND THE INFORMATION
HEREIN CONTAINED IS THE PROPERTY OF
QUICK FITTING, INC. AND IS SUPPLIED
UPON THE EXPRESS CONDITIONS THAT
THE SAME BE RETURNED TO QUICK
FITTING, INC. UPON REQUEST. ALL
INFORMATION HEREIN CONTAINED IS TO
BE TREADED AS SECRET AND
CONFIDENTIAL. NO REPRODUCTION OF
THIS DRAWINGS OR ANY PART THEREOF
SHALL BE MADE WITHOU THE WRITTEN
PERMISSION OF QUICK FITTING, INC.
ACCEPTANCE OF THIS DRAWING SHALL
BE DEEMED ACCEPTANCE OF THE
FOREGOING CONDITIONS.
Depends on
configuration
N. Ochoa
11-18-2019
N. Ochoa
L. Ochoa
11-18-2019
11-21-2019
Designed
L. Ochoa
11-21-2019
DFT Male Pulling Elbow Assembly
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES WITH
MILLIMETERS
WEIGHT:
B
EMT WATERTIGHT
FITTINGS COVERED IN A NEMA
4X POWDER COATING, MAKING
IT READY FOR DIRECT BURIAL
AND CORROSION RESISTANT
*N/A ON EMT DRY LOCATION