Installation Instructions

SOYAL
ACCESS CONTROL SYSTEM
®
AR-323-D
V200615
Smart Digital Door Lock
RF Card
- 4 -
Adding and Deleting Tag
M4/M8
Delete All Tags
Input 123456 (or Master Code)
→
29 29
Delete Single Tag
Input 123456 (or Master Code)
→
10 SSSSS EEEEE
[e.g.] Delete User Address: 00058
Enter program mode
→
10 00058 00058
9
9
Delete a batch of Tags
Input 123456 (or Master Code)
→
10 SSSSS EEEEE
[e.g.] Delete User Address: 00101~00245
Enter program mode
→
10 00101 00245
9
9
Add a Single Tag or Random tags
Input 123456 (or Master Code)
→
19 UUUUU 00001
→
Present the tag(s) to Access Controller
(single tag or random tags one by one)
→
Done
[e.g.] Add 2 random cards to User Addresses No. 100 and No. 101:
Enter program mode
→
19 00100 00001
→
Present the tags one by one
→
Done
Input 123456 (or Master Code)
→
19 UUUUU QQQQQ
→
Present the tag
(only use the tag with the lowest number)
→
OK
Add a batch of Sequential tags
[e.g.] Add 20 pcs sequential tags (62312~62331) to User Address NO.101 ~ NO.120:
Enter program mode
→
19 00101 00120
→
Close Tag into RF Area
(only use the tag NO.62312)
→
OK
M6
※
In this mode, User Address = Card Code
※
In this mode, Card and PIN, If you want to modify refer to password setting 17
Add Tags
Input 123456
(or Master Code)
→
11 SSSSS EEEEE
→
OK
[e.g.] Add User Address: 00100~01254
Enter program mode
→
11 00100 01254
→
OK
Add tag by presenting:
Delete tag by presenting:
Input 123456 (or Master Code)
→
22 1
→
Present the tag to Access Controller
→
OK
Input 123456 (or Master Code)
→
22 0
→
Present the tag to Access Controller
→
OK
Delete All Tags:
Input 123456 (or Master Code)
→
29 29
Delete Tags
Input 123456
(or Master Code)
→
10 SSSSS (or )EEEEE
→
OK
[e.g.] Delete a tag with card code 62362
Enter program mode
→
10 62362 62362
→
OK
9
Tag Information
(125kHz)
※
For Mifare tags, the separator between Site Code & Card Code is comma "
,
".
SITE CODE
CARD CODE
SITE CODE
CARD CODE
Operation process
A. Enter / Exit Program Mode
Master Code modication
Enter program mode
→
09 PPPPPPRRRRRR [Input the 6-digit new master code twice.]
[e.g.] Set the Master code to be 876112, input 123456
→
09 876112876112
Enter the program mode
Input 123456 or PPPPPP
[e.g.] The Default Value= 123456, if the Master Code is already changed= 876112, input 876112
→
program mode entered
Exit the program mode
Input
Enter program mode
→
00 NNN
[Node ID: 001~254; if the access controller is connected to AR-716E, its Node ID will be 001~016.]
B. Change the Node ID of Controller
Enter program mode
→
04 N [N=4/6/8]
C.Set up M4/M6/M8