USB2.
SOYO™ 1. 3.3V AGP card (essentially this means all AGP 1X and AGP 2X cards) are not supported. Only 1.5V AGP cards essentially this means any card that supports AGP 4X or higher) can be used in this mainboard. 2. Please read the user guide before proceeding with your installation. Serious damage may occur if the procedure is not followed properly. 3. If you have any problem getting your system to work, please follow the troubleshooting tips on page 24 of your user guide. 4.
SOYO™ SY-P4I845PEISA/P4I845GEISA Motherboard mPGA Socket 478 processors Intel 845PE/GE AGP/PCI/ISA Motherboard 533/400 MHz Front Side Bus supported ATX Form Factor Copyright © 2003 by SOYO Computer Inc. Trademarks: SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only.
Introduction SY-P4I845PEISA/GEISA Quick Start Guide 1 Introduction Congratulations on your purchase of the SY-P4I845PEISA/GEISA Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-P4I845PEISA/GEISA Motherboard User's Manual that came with your Motherboard.
SY-P4I845PEISA/GEISA Quick Start Guide Introduction SY-P4I845PEISA Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector COM A +12V Power PRT ATX Power USB 1_2 LAN Connector Audio out / Front out 5 1 6 2 J30 Audio in / REAR out DDR1 MIC IN / Center & Bass out AGAME LAN DAVICOM DM9102AE DDR2 IDE 2 IDE 1 AGP Slot 3V Lithium Battery PCI Slot #1 C-Media CMI9738 JP5 AUXIN1 4 1 4 CMOS Clear Jumper 1 1 CDIN1 PCI Slot #2 PCI Slot #3 FLP USB20_1 USB20_2 PCI Slot #4 10 6 10 6 1
Introduction SY-P4I845PEISA/GEISA Quick Start Guide SY-P4I845GEISA Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector COM A +12V Power VGA out PRT ATX Power USB 1_2 LAN Connector Audio out / Front out 5 1 6 2 J30 Audio in / REAR out DDR1 MIC IN / Center & Bass out AGAME LAN DAVICOM DM9102AE DDR2 IDE 2 IDE 1 AGP Slot 3V Lithium Battery PCI Slot #1 C-Media CMI9738 JP5 AUXIN1 4 1 4 CMOS Clear Jumper 1 1 CDIN1 PCI Slot #2 PCI Slot #3 FLP USB20_1 USB20_2 PCI Slot #4 10 6
Key Features Supports Intel® mPGA Socket 478 processors - Pentium® 4 - Supports multiple-boot function AGP 2.0 Compliant; AGP Connector supports: - 1.
SY-P4I845PEISA/GEISA Quick Start Guide 2 Installation Hardware Installation To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. Check the Motherboard for damage.
SY-P4I845PEISA/GEISA Quick Start Guide Install the Motherboard We will now begin the installation process. Please follow the systematic procedure designed to lead you to a complete and correct installation. Step 2- Install memory modules Step 3- Connect cables, case wires, and power supply Install expansion cards Step 4- Install expansion cards Step 1.
SY-P4I845PEISA/GEISA Quick Start Guide Step 2. Configure Memory P4I845PEISA/GEISA support PC2100 & PC2700, non-ECC and non-registered module. Hardware Installation The largest memory capacity possible is 2GB. On this motherboard (PEISA/GEISA), DRAM speed can be set independent from the CPU front side bus speed. A maximum of 2 pcs. Double-sided module can be used at the same time.
SY-P4I845PEISA/GEISA Quick Start Guide Connectors and Plug-ins CPU Cooling Fan: CPUFAN1 Pin1 Pin2 Pin3 CPU Cooling Fan: CPUFAN2 Pin1 Pin2 Pin3 GND GND Sensor +12V NC Chassis Fan: CHAFAN1 Pin1 Pin2 Pin3 GND +12V Sensor Chassis Fan: CHAFAN2 Pin1 Pin2 Pin3 GND +12V Sensor CD-IN 1 Pin4 Right Pin1 Pin2 Pin3 Pin4 Pin1 AUXIN1 Pin2 Pin3 Left GND GND Right Left GND GND Standard IrDA (Infrared Device Header): SIRCON MIC & LED Connector: J30 Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3 Pin4 Pin5 Pi
SY-P4I845PEISA/GEISA Quick Start Guide Hardware Installation ATX 12V Power Supply: ATX PW Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power supply, an AT or ATX power supply can NOT be used.) When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to provide at least 720mA on the 5V Standby lead (5VSB). PS. Power supply must be compliant to the ATX 12V specification.
SY-P4I845PEISA/GEISA Quick Start Guide Install expansion cards The motherboard has 1 AGP slot, 4 PCI slots and 3 ISA slots. 1. Read the instruction document of the related expansion card before inserting the expansion card into the computer. 2. Press the expansion card firmly into the expansion slot on the motherboard. 3. Make sure the metal contacts on the card are correctly seated in the slot. 4. Replace the screw to secure the slot bracket of the expansion card. 5.
SY-P4I845PEISA/GEISA Quick Start Guide Audio Speakers connections When using 2-channel speaker, connect the speaker cable to line-out. If you’re using 4 channel speaker, connect the front L/R speakers to line-out and rear Hardware Installation L/R speakers to Line-in. make sure to set the audio software for 4 channel speaker system. Do not forget to set the Audio Rack software to 4-channel system.
SY-P4I845PEISA/GEISA Quick Start Guide 3 Quick BIOS Setup After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be shown on the screen. Then, follow these steps to configure the CPU settings. Step 1. Select [STANDARD CMOS SETUP] Step 2.
SY-P4I845PEISA/GEISA Quick Start Guide 4 The SOYO CD The SOYO-CD will Auto Run only in Windows Based Operating Systems. Your SY-P4I845PEISA/GEISA motherboard comes with a CD-ROM labeled “SOYO CD”. The SOYO CD contains a. The user’s manual for your new motherboard in PDF format, b. The driver software needed for installation, and c. A database in HTML format with information on SOYO motherboards and other products. Step 1.
The user's manual files included on the SOYO CD are in PDF (Postscript Document Format). In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present on your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file.
SY-P4I845PEISA/GEISA Quick Start Guide Intel Chipset Software Installation Utility for Win 98/98SE/ME/2000/XP Intel Application Accelerator for Win 98/98SE/ME/NT/2000/XP Intel Extreme Graphics Driver for Win 98SE/ME (For P4I845GEISA only) Intel Extreme Graphics Driver for Win 2000/XP (For P4I845GEISA only) Intel Extreme Graphics Driver for Win NT4.0 (For P4I845GEISA only) Intel USB2.0 Driver for Win 98/ME Intel USB2.
SY-P4I845PEISA/GEISA Quick Start Guide 2. The application includes the CD Player/MIDI Player/MP3/Wave Player/Mixer to control your PC’s audio functions. Davicom Onboard Lan Driver for Win 9x/ME/NT/2000/XP This setup program will install the Driver for Davicom Onboard Lan. P4I845PEISA/GEISA Hardware Monitor fir Win 9x/ME/2000/NT/XP Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored.
SY-P4I845PEISA/GEISA Quick Start Guide The SOYO CD After Windows XP installation, your device manager should look like this: For P4I845GEISAonly 20
SY-P4I845PEISA/GEISA Quick Start Guide After driver installation, your Windows XP device manager should look like this: The SOYO CD For P4I845GEISAonly Note: To install the USB 2.
SY-P4I845PEISA/GEISA Quick Start Guide Drivers directory list in the CD driver Cmedia driver Intel IAA The SOYO CD Intel Inf Driver Hw monitor Davicom Lan driver USB 2.
SY-P4I845PEISA/GEISA Quick Start Guide 5 USB2.0 Driver Installation For Windows 2000 and Windows XP USB 2.0 Drivers are available for download using Windows Update for both Windows XP and Windows 2000. For additional information regarding USB 2.0 support in Windows XP and Windows 2000, please visit http://www.microsoft.com/hwdev/bus/USB/default.
SY-P4I845PEISA/GEISA Quick Start Guide Quick Trouble shoot tips Boot-up Issues The system does not power-up, no beeping sound heard and the CPU fan does not turn on. 1. 2. 3. 4. 5. 6. Check if the power cord is plug to the power source. Check if the power is connected to the M/B. Check if the cable of the case power button is connected to the M/B power button connector (see connectors and plug-ins in the manual for more info). Make sure the power supply is not defective. Change the power supply.
SY-P4I845PEISA/GEISA Quick Start Guide The system turns on for some seconds then shutdown by itself. 1. 2. 3. 4. 5. Check if the CPU fan is connected to the CPUFAN1 connector. The CPU might be overheating. Check the CPU FAN if it is defective or see if the CPU fan is in contact with the CPU. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how to clear the CMOS). Make sure the power supply you have on your system supports the M/B specification. Example.
SY-P4I845PEISA/GEISA Quick Start Guide 9. system has other peripherals connected, like CD-RW, extra HDD, etc. disconnect them. Install Intel Inf driver. My system intermittently locks up, during Windows installation. 1. 2. 3. Go to BIOS and load “load optimized defaults”. Check website for any BIOS update. If still has the problem, remove all other add-on cards except CPU/ Memory/ Video card/Hard disk. See if you can finish Windows installation.
SY-P4I845PEISA/GEISA Quick Start Guide I’m using a 400MHz FSB CPU, I cannot find the DDR 166MHz option in the BIOS, why? The CPU used should be 133MHz FSB to have PC2700 support. VGA Issue I cannot set my VGA to go higher than 16 color (640x 480). 1. 2. Make sure that you have installed the Intel Inf driver. Install/ re-install the VGA driver.
SY-P4I845PEISA/GEISA Quick Start Guide The sound and everything else works fine except that the recorder and microphone do not work. What is wrong? 1. 2. Please go to sound properties and check if the recorder and microphone in the are enabled. Check if Microphone is ok. Added PCI Audio Card does not work on this motherboard. 1. 2. Go to SOYO COMBO Setup and Disable “onboard audio”. Go to integrated peripherals and Disable “Game port address” and “Midi port address”.
SY-P4I845PEISA/GEISA Quick Start Guide How to contact us: If you are interested in our products, please contact the SOYO sales department in the region you live. If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the country that you live in. TAIWAN SOYO COMPUTER INC. No. 21 Wu-Kung 5 Rd., Hsin Chuang City, Taipei Hsien, Taiwan, R.O.
Edition : August 2003 Version 1.
