Introduction Hardware Installation ESS ™ Audio SiS VGA DriverThe SOYO CD Quick BIOS Installation Setup Driver Installation SY-5SSM Motherboard Quick Start Guide Tested To Comply With FCC Standards FOR HOME OR OFFICE USE C FC 100% POST CONSUMER RECYCLED PAPER
SOYO ™ SY-5SSM Motherboard Pentium ® Class CPU (66&100MHz Host Bus) supported SiS530 AGP/PCI Motherboard Micro-ATX Form Factor Copyright © 1998 by Soyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies.
1 Introduction Congratulations on your purchase of the SY-5SSM Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-5SSM Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.
Introduction SY-5SSM Quick Start Guide SY-5SSM Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector J1 2 4 6 8 10 JP30 1 3 5 7 9 P.B. SRAM 64Kx64 USB 2 ATX Power COM 2 P.B.
SY-5SSM Quick Start Guide Installation To avoid damage to your Motherboard, follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.
SY-5SSM Quick Start Guide Install the Motherboard Hardware Installation Follow the steps below in order to perform the installation of your new SY-5SSM Motherboard. Step 1. Install the CPU To mount the Pentium® class processor that you have purchased separately, follow these instructions. CPU Mount Procedure 1 2 3 4 1. Lift the socket handle up to a vertical position. 2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. 3.
SY-5SSM Quick Start Guide Step 2. Set the CPU Voltage ( JP30) Processor AMD K5 PR100 AMD K5 PR133 AMD K5 PR166 Voltage 3.52 V Voltage Setting: JP30 1-2 3-4 5-6 7-8 9-10 open short short short short The AMD K5 and K6 come in several versions with different voltages. Please verify the correct voltage settings with your dealer before installation. The most common K5 runs on 3.52V. AMD K6 AMD K6 166 200 2.9 V open short short open short AMD K6 233 3.
SY-5SSM Quick Start Guide Step 3.
SY-5SSM Quick Start Guide Step 4. Make Connections to the Motherboard Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, and other devices. For more details on how to connect internal and external peripherals to your new SY-5SSM Motherboard, please refer to SY-5SSM Motherboard User's Guide and Technical Reference online manual on CD-ROM.
SY-5SSM Quick Start Guide Step 5. Configure Memory Hardware Installation Your board comes with three DIMM sockets, providing support for up to 768MB of main memory using DIMM modules from 8MB to 256MB. For 66/75MHz host bus CPUs use 12ns or faster DIMM modules.
SY-5SSM Quick Start Guide Step 7. Enable/Disable the Onboard Sound (JP9) The onboard audio features of your Motherboard are controlled by jumpers JP9 Choose the available sound options among the following table: JP9 Onboard Sound: Enable short Onboard Sound: Disable open Step 8. Clear CMOS Data (JP5) Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap.
SY-5SSM Quick Start Guide 3 Quick BIOS Setup After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete the quick BIOS setup. Quick BIOS Setup Step 1. Select [LOAD SETUP DEFAULT] Select the “LOAD SETUP DEFAULT”menu and type “Y”at the prompt to load the BIOS optimal setup. Step 2.
SY-5SSM Quick Start Guide 4 The SOYO CD Your SY-5SSM Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains the user's manual file for your new Motherboard, the drivers software available for installation, and a database in HTML format with information on SOYO Motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below.
SY-5SSM Quick Start Guide Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK. SOYO CD Manuals Please select your manual In the box below and click OK. The SOYO CD 5SSM OK Back (Manual Selection Menu) The user's manual files included on the SOYO CD are in PDF (Postscript Document) format.
(Driver Installation Menu) A short description of all available drivers follows: Ø SiS 530 VGA drivers The SiS VGA driver for windows 95/98 must be installed to make use of your on board VGA function. (For WinNT read the instructions in back of the Manual) Ø SOYO SpeedPro BusMaster Driver for Windows 95/98 Without the busmaster drivers the CPU will need to be involved every time data is read from or written to the Harddisk.
SY-5SSM Quick Start Guide Ø ESS Windows NT drivers (for PCI) These are the Windows NT drivers for the on board soundchip. Make sure to first install these drivers before installing the ESS Soundtrack Program. For the Windows 95/98 ESS drivers please read the installation steps in the back of this manual. Ø ESS Soundtrack Program (for PCI) With this application program the user can make use of the on board sound chip.
SY-5SSM Quick Start Guide Note: If no HTML browser is installed on your system, the Start Up program will prompt you on whether or not you would like to install the Internet Explorer* browser. Click YES to install the HTML browser. After the installation is complete, please restart your system. Then re-run the SOYO CD and you will be able to browse the SOYO HTML database.
SY-5SSM Quick Start Guide 5 SiS VGA Driver Installation Introduction Your SY-5SSM Motherboard is equipped with the SiS 530 chipset that offers extended graphics and text modes capabilities. To make use the advanced features of the SiS 530 chipset, you will need to install software drivers and application programs included on the CD-ROM. This section describes how to perform the SiS VGA driver installation for Microsoft Windows NT environment.
SY-5SSM Quick Start Guide 9. 10. 11. 12. The [Select Device] dialog box will appear, showing the driver. Click on [OK] and the driver will be installed. Select [Close] or [Apply] button from display properties sheet. A message will appear stating you must restart the Windows 95 system, select [Yes] to restart. After restarting, Windows 95 will run on 640x480x256 color, 75NI. Selecting Resolution, Color Depth and Refresh Rate 5. 6. 7. 8. Click [Start] menu and select Control Panel from Settings group.
SY-5SSM Quick Start Guide 6 ESS ™ Audio Driver Installation Windows® 95/98 Sound-Driver Installation This section describes how to perform the ESS ™ audio driver installation in Windows® 95/98 environment. The Windows NT drivers can be installed automatically through the SOYO CD. Refer to page 16. After first installing Windows® 95/98, follow these steps: From the desktop, click [Start] menu and select [Control Panel] from [Settings] 1. group. 2. Select the [System] icon. 3.
Edition: December 98 Version 1.0 5SSM SERIAL International Headquarters Soyo Computer Inc., (Taiwan) Tel: 886-2-2290-3300 Fax: 886-2-2298-3322 Web Site: http://www.soyo.com.tw E-mail: info@mail.soyo.com.tw USA Branch Office Soyo Tek Inc., (USA) Tel: (408) 452-7696 Fax: (408) 573-7696 Web Site: http://www.soyousa.com E-mail: sales@soyousa.com SOYO Europe Soyo Europe B.V., (Holland) Tel: 31-79-3637500 Fax: 31-79-3637575 Web Site: http://www.soyo-europe.com http://www.soyo.nl E-mail: Sales@soyo.