Introduction The SOYO CD Quick BIOS Setup Installation SY-5EMA+ V1.
NSTL “Year 2000 Test” Certification Letter November 6, 1998 Testing Date: November 6, 1998 Certification Date: November 6, 1998 Certification Number: NCY2000-981106-005 To Whom It May Concern: We are please to inform you that the “SY-5EMA+” system has passed NSTL Year 2000 certification test program. The Year 2000 test program tests a personal computer for its ability to support the year 2000. The “SY-5EMA+: system is eligible to carry the NSTL :Year 2000 Certification” seal.
SOYO SPORTON INTERNATIONAL INC. Declaration of Conformity According to 47 CFR, Part 2 and 15 of the FCC Rules Declaration No.: D8D0404 Dec. 09, 1998’ The following designated product EQUIPMENT: Main Board MODEL NO.: SY-5EMA+ which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules.
SOYO ™ SY-5EMA+ V1.0 Super7 Motherboard Pentium® Class CPU supported ETEQ82C663x PCI/AGP Motherboard ATX Form Factor Copyright © 1999 bySoyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies. Copyright Notice: All rights reserved.
SY-5EMA+ V1.0 Quick Start Guide Introduction Congratulations on your purchase of the SY-5EMA+ V1.0 PCI/AGP Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-5EMA+ V1.0 Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.
SY-5EMA+ V1.0 Quick Start Guide SY-5EMA+ V1.0 Motherboard Layout DIMM3 DIMM 2 DIMM 1 CPUFAN PS/2 Mouse PS/2 KB Connector Connector * ATX Power USB1 P.B. SRAM 64Kx64 USB2 12 34 5 SW2 ON Introduction 1 P.B.
SY-5EMA+ V1.0 Quick Start Guide 2 Installation l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.
SY-5EMA+ V1.0 Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-5EMA+ V1.0 Super 7 ™ Motherboard. Step 1. Install the CPU To mount the Pentium® class processor that you have purchased separately, follow these instructions. Installation CPU Mount Procedure 1 2 3 4 1. Lift the socket handle up to a vertical position. 2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. 3.
SY-5EMA+ V1.0 Quick Start Guide Step 2. Set SW2 for CPU Voltage SW2 is used to set the CPU core voltage. Please verify the correct voltage settings with your dealer before installation. Use the following table to set SW2 to the proper voltage value according to the specifications marked on your CPU: AMD K5 PR100 AMD K5 PR133 AMD K5 PR166 Voltage 3.52 V 1 Voltage Setting: SW2 2 3 4 5 on on off on on The AMD K5 and K6 come in several versions with different voltages.
SY-5EMA+ V1.0 Quick Start Guide Processor Voltage IDT WinChip C6/2-225* IDT WinChip 2-266 IDT WinChip 2-300 IDT WinChip C6/2 -200* IDT WinChip 2 -233* Rise mP6 PR266 Step 3. Voltage Setting: SW2 1 2 3 4 5 3.52 V on on on on off The IDT WinChip C6/2 comes in several versions with different. Voltage. Please ask your dealer for the correct voltage. 3.3 V on off on on off 2.
SY-5EMA+ V1.0 Quick Start Guide Frequency Setting: SW1 Multiplier CPU Bus Clock Cyrix 6x86 MX PR 233 2.5x 75MHz Cyrix 6x86 MX PR 266 2.5x 83MHz 1-2 3.5x 66MHz 1-2 3x 75MHz 1-2 2-3 2-3 off on off off on off 4.0x 66MHz 1-2 2-3 2-3 on off on off off off Cyrix MII 300 Cyrix MII 333 JP10 JP8 1-2 2-3 JP9 1 2 3 4 5 6 2-3 on on off off on off 1-2 2-3 on on off on on off 2-3 2-3 off off off off off off 3.
SY-5EMA+ V1.0 Quick Start Guide Installation JP8 is used to indicate the frequency of the CPU bus clock to the ETEQ chipset. JP9 and JP10 are used to determine that the SDRAM is running at the frequency of the CPU bus clock or the AGP clock. CPU BUS Clock AGP BUS Clock PCI Clock JP10 JP8 JP9 SDRAM Clock 66MHz 75MHz 66MHz 75MHz 33MHz 37.5MHz 83MHz 55MHz 27.5MHz 95MHz 63.4MHz 31.7MHz 100MHz 66MHz 33MHz 112MHz 75MHz 37.5MHz 124MHz 82.6MHz 41.
SY-5EMA+ V1.0 Quick Start Guide Step 4. Attach Connectors This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on how to connect internal and external peripherals to your new SY-5EMA+ V1.
SY-5EMA+ V1.0 Quick Start Guide Step 5. Configure Memory Your board comes with three DIMM sockets, providing support for up to 768MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz host bus CPUs use 12ns or faster DIMM modules; for 83MHz host bus CPUs use 8ns modules. Memory Configuration Table MEMORY CONFIGURATION RAM Type Installation Single RAM Module Size (MB) Step 6.
SY-5EMA+ V1.0 Quick Start Guide 3 Quick BIOS Setup After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete the quick BIOS setup. Step 1. Select [LOAD SETUP DEFAULT] Select the “LOAD SETUP DEFAULT”menu and type “Y”at the prompt to load the BIOS optimal setup. Step 2.
SY-5EMA+ V1.0 Quick Start Guide 4 The SOYO CD Your SY-5EMA+ V1.0 Super 7 ™ Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains the user's manual file for your new Motherboard, the drivers software available for installation, and a database in HTML format with information on SOYO Motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below.
SY-5EMA+ V1.0 Quick Start Guide Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK. SOYO CD Manuals Please select your manual in the box below and click OK. 686 boards: 586 boards: 5EMA+ V1.
SY-5EMA+ V1.0 Quick Start Guide Ø running the following program on your Windows CD: Win95/OSR2/Usbsupp/USBsupp.exe After installation of windows, you will need to install the VIA drivers. Follow the instruction below. Click the Enter SOYO CD button to display the list of drivers that can be installed on your Motherboard. The start-up program displays the drivers available for the 5EMA+ V1.0 and the Windows version you use.
SY-5EMA+ V1.0 Quick Start Guide Ø SOYO SpeedPro Busmaster Driver for Win 95/98 Without the busmaster drivers the CPU will need to be involved every time data is read from or written to the Harddisk. The busmaster drivers make use of DMA (Direct Memory Access) to relieve the CPU of this burden, thus speeding up the system. The SOYO SpeedPro driver makes use of an advanced caching algorithm, which gives it an advantage over other busmaster drivers.
SY-5EMA+ V1.0 Quick Start Guide Step 5. Enter the SOYO CD Click the Enter SOYO CD button to enter the SOYO HTML database. The Start Up program will activate the default HTML browser installed on your system (for example, Internet Explorer or Netscape) to visualize the contents of the SOYO CD. The SOYO CD The SOYO CD contains useful information about your Motherboard and other SOYO products available.
Edition: April 1999 Version 1.1 SY-5EMA+ V1.0 SERIAL International Headquarters Soyo Computer Inc., (Taiwan) Tel: 886-2-2290-3300 Fax: 886-2-2298-3322 Web Site: http://www.soyo.com.tw E-mail: info@mail.soyo.com.tw USA Branch Office Soyo Tek Inc., (USA) Tel: (408) 452-7696 Fax: (408) 573-7696 Web Site: http://www.soyousa.com E-mail: sales@soyousa.com SOYO Europe Soyo Europe B.V., (Holland) Tel: 31-79-3637500 Fax: 31-79-3637575 Web Site: http://www.soyo-europe.com http://www.soyo.nl E-mail: Sales@soyo.
