Computer Hardware User Manual

SY-5SSM

Quick Start Guide

Hardware

Installation

Step 7. Enable/Disable the Onboard Sound (JP9)

The onboard audio features of your Motherboard are controlled by jumpers JP9

Choose the available sound options among the following table:

Sound Settings JP9

Onboard Sound: Enable short

Onboard Sound: Disable open

Step 8. Clear CMOS Data (JP5)

Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5, and then by

shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white

colored cap.

CMOS Clearing Clear CMOS Data Retain CMOS Data

JP5 Setting

Short pin 2-3 for a

few seconds to

clear the CMOS

Short pin 1-2

to retain new

settings

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.