Quick Start Guide Aureal Sound The SOYO CD Quick BIOS Driver Setup Installation Introduction Hardware Installation SY-6IWM Motherboard
SOYO ™ SY-6IWM Motherboard Pentium® III, Pentium® II & CeleronTM processors Intel FW82810E AGP/PCI/AMR Motherboard 133/100/66 MHz Front Side Bus supported Micro ATX Form Factor Copyright © 1999 bySoyo Computer Inc. Trademarks: Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only.
1 Introduction Congratulations on your purchase of the SY-6IWM Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-6IWM Motherboard Uses’Guide that came with your Motherboard.
Introduction SY-6IWM Quick Start Guide SY-6IWM Motherboard Layout JP1 PS/2 KB PS/2 Mouse Connector Connector 1 ATX Power CPUFAN 3 1 USB 1 Slot 1 USB 2 PRT FDC Intel COM 1 3V Lithium Battery FW82810E 5 USB3 VGA 1 COM2 1 IDE 2 IDE 1 SDRAM SDRAM JOYSTICK AMR J10 AUX-IN 1 JP3JP2 3 JP7 PCI Slot #1 4 3 1 1 1 PWRBT Power JP9 LED + Reset Intel 82802AB 1 PCI Slot #2 4 Intel 1 FW82801AA PCI Slot #3 Winbond W83627HF -AW + ACPI + LED 4MB CODEC AC97 J9 CD-IN DIMM 3 1 4
Key Features Pentium® III processor (450-733MHz), Pentium® II processor (233-450MHz) & Celeron ™ processor (266-433MHz) Supports 66/100/133 MHz Front Side Bus Frequency Ø Supports onboard hardware monitoring and includes Hardware Doctor ™ utility Ø Fan speed control Ø Battery Low voltage Detect Ø Auto-detect CPU voltage Ø Supports multiple-boot function Ø Chipset integrated 3D AGP Accelerator Ø Y2K Complaint Ø Easy CPU settings in BIOS with the “SOYO COMBO Setup” Ø Supports Audio Modem Ris
SY-6IWM Quick Start Guide 2 Installation Hardware Installation To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. l Check the Motherboard for damage.
SY-6IWM Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6IWM Motherboard. Step 1. Install the CPU 266MHz (66 x 4.0) 300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.5) 400MHz (66 x 6.0) 433MHz (66 x 6.5) 450MHz (100 x 4.5) 500MHz (100 x 5.0) 550MHz (100 x 5.5) 600MHz (100 x 6.0) 533MHz (133 x 4.0) 600MHz (133 x 4.5) 667MHz (133 x 5.0) 733MHz (133 x 5.5) FSB 100MHz 350MHz (100 x 3. 5) 400MHz (100 x 4.
SY-6IWM Quick Start Guide Configure Memory Your board comes with three DIMM sockets, and supports up to 512MB main memory using industry standard Synchronous DRAM (SDRAM), single or double-sided, 3.3V unbuffered DIMM modules from 8MB to 256MB. Registered DIMMs or DIMMs populated with 4 bit wide SDRAM devices are not supported. PC100 compliant DIMM module is required regardless of 66, 100 or 133 MHz FSB speed. Hardware Installation Step 2.
S Y - 6 I W M Quick Start Guide Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard. Step 3. For more details on connecting internal and external peripherals to your new SY-6IWM Motherboard, please refer to SY-6IWM Motherboard User's Guide and Technical Reference online manual on the CD-ROM.
S Y - 6 I W M Quick Start Guide Step 4. Set JP2, JP3,JP4 and JP7 to configure CPU FSB Frequency Hardware Installation The FSB Frequency can be set through the BIOS [SOYO COMBO SETUP]. The BIOS will allow selection from 1 out of 3 intervals. The intervals are: - 66 to 100MHz - 100 to 133MHz - 133Mhz and above What interval can be selected from depends on the jumper setting on the board.
S Y - 6 I W M Quick Start Guide 66MHz JP3 open JP7 open 1 2 Step 5.
S Y - 6 I W M Quick Start Guide Step 7. CMOS Clear (JP5) Hardware Installation After you have turned off your computer, clear the CMOS memory by momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting in order to recover and retain the default settings. Jumper JP5 can be easily identified by its white colored cap.
SY-6IWM Quick Start Guide 3 Quick BIOS Setup After completion of hardware installation, turn the power switch on, then press the key while the system diagnostic is checking to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be displayed on screen. Then follow these steps to configure the CPU settings. Step 1. Select [Standard CMOS Features] Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
SY-6IWM Quick Start Guide Step 4. Select [SAVE & EXIT SETUP] Quick BIOS Setup Press to save the new configuration to the CMOS memory, and continue the boot sequence.
SY-6IWM Quick Start Guide The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-6IWM Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains the user's manual file for your new (1) Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Step 1.
The SOYO CD SY-6IWM Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file.
SY-6IWM Quick Start Guide driver revision: Intel Whitney VGA Drivers for Win9x Intel Whitney VGA Drivers for NT 4.0 Intel inf utility for Win9x Intel Whitney security utility for Win9x/NT Whitney Winbond hardware doctor for win 95/98 Aureal Audio Application Cancel OK (Driver Installation Menu) A short description of all available drivers follows: Ø INTEL Whitney VGA Drivers for NT 4.
SY-6IWM Quick Start Guide Step 3. Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automatically find the latest BIOS, manual and driver releases for your motherboard. This button will only work if your computer is connected to the internet through a network or modem connection. Make sure to get your modem connection up before clicking this button. Step 4. Enter the SOYO CD Click the Enter SOYO CD button to enter the SOYO HTML database.
SY-6IWM Quick Start Guide 5 Aureal Sound Driver Installation Installation of the Aureal Sound drivers under Windows 95/98 SYSTEM REQUIREMENTS: 1. Access to Microsoft Windows 95 or Microsoft Windows 98 installationCD-ROM. 2. Good-quality speakers or headphones and connecting cables. 3. Joystick and MIDI keyboard for testing the gameport. Wavetable Memory Requirements: The Vortex hardware wavetable engine uses a native 4MB sample set. The samples are stored on hard disk and swapped to DRAM as required.
SY-6IWM Quick Start Guide Vortex Application Setup Windows NT 4.0 Installation Windows 2000 Installation \driv-all\Aureal\A3DDemos \driv-all\Aureal\WinNT40 \driv-all\Aureal\Win2000 UNINSTALLING WINDOWS 95/98 DRIVERS To uninstall the Vortex software, you can use the following procedure: 1. Open to the Windows 95/98 Device Manager (right-click on "My computer" and select "Properties"). 2. Open the "Multifunction Adapters" tree and select "Vortex Multifunction PCI Platform" 3.
SY-6IWM Quick Start Guide Quick Trouble shoot tips Video (no display) related issues I built a new computer system using a Soyo board and nothing happens when turning it on, no video and no beeps from the PC speaker. What is happening and how can it be fixed? No screen and no beeps mean that your CPU and motherboard do not work at all. It could be that the CPU is not seated correctly or that a component on the M/B is grounded (shorted) with the case.
SY-6IWM Quick Start Guide I get distorted video my AGP card right after I save my bios. Why is that? The cause is likely that your AGP card is not running at the correct bus speed. To fix this, please clear the CMOS via JP5 and if it still does not work, please upgrade your motherboard bios to the latest version. BIOS Issues Where can I find the BIOS revision of my mainboard? It will be displayed on the up-left corner on the screen during boot-up.
SY-6IWM Quick Start Guide In Device Manager, I keep getting yellow exclamation signs on my sound port even though I have installed my sound driver several times and I could not get my sound card to work. What is wrong? It is likely that you did not have the correct driver installed. If you are sure that the correct sound driver has been installed, then please install the 'south bridge' driver for the motherboard.
SY-6IWM Quick Start Guide How to contact us: n If you are interested in our products, please contact the SOYO sales department in the region you live. n If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the country that you live in. SOYO Taiwan SOYO USA No. 21 Wu-Kung 5 Rd.
SY-6IWM Quick Start Guide SOYO Deutschland GmbH SOYO Hong Kong August-Wilhelm-Kuhnholz-Str. 15 Region Covered: Hong Kong D-26135 Oldenburg Web Site: www.soyo.com.hk Region Covered: Germany Sales: Web Site: www.saat.de, www.soyo- tel: 852-27109810 saat.com, www.soyo-saat.de fax: 852-27109078 Vertrieb Mainboards, Notebooks und E-mail: soyo@hkstar.com SoyoCom Produkte: E-Mail: sales@soyo.
Edition: January 2000 Version 1.