Instruction Manual

Operating instructions
Charging
Lift the weather proof rubber flap at the magnetic end of the main body.
Connect the USB-C cable end (smallest end) into the main unit, then
connect the larger USB cable end to any suitable USB outlet. This could be,
your computer, vehicle, phone charger or portable power bank, etc.
Once connected the battery charge indicator lights will illuminate and show
the charge level. When fully charged all 4 lights will show solid.
Be sure to reinsert the weather cover before taking the unit into any wet, or
dirty environments.
Bluetooth connection
First ensure your phone or other Bluetooth enabled device has its Bluetooth
turned on (see Settings).
Then press and hold the center button (for 3 seconds), on end of main body.
The unit will respond with the words “Power on, Bluetooth” then shortly
afterward “Bluetooth connected”. The initial paring may not occur
automatically. In which case open the Bluetooth on your device and
manually select the device connection. Once paired it will automatically
connect whenever the Speaker is powered on.
On unit the volume can be adjusted by the + or – buttons and track selection
made via the forward and reverse buttons.
To turn off press and hold the center button (for 3 seconds), the unit will
respond with the words “Power Off”
Light Operation
The ON / OFF button for the light is located adjacent to the COB LED’s
Warning: Do not look at the LED’s, face the unit away from you and press
the button once to turn ON Low lighting, press the button once again for
High lighting and a third time to turn the light OFF
Operating temperature:0℃-35℃
3