Instruction Manual

Limited Warranty Policy
This Limited Warranty applies only to new products. It is a condition of this Limited Warranty Policy that all servicing requirements are
completed as listed in the owner’s manual, (said servicing is at the owner’s expense). We recommend that all servicing is completed
by an Authorised Service Agent and that records of said servicing are retained by the purchaser as proof in the event of a warranty
claim. The Limited Warranty period commences from the date of purchase.
SP Tools agrees, subject to the conditions of this warranty, SP Tools or its Authorised Service Centre will perform necessary warranty
repairs on the product without charge for parts or labour if in the opinion of SP Tools, the product does not perform in accordance with
its specifications during the Limited Warranty period, due to any fault in manufacturing, materials and/or workmanship within the
specified warranty period. This warranty only applies to items purchased through SP Tools or its Authorised Distributors or Dealers.
Warranty cover only applies if valid proof of purchase is presented at the time of making a claim.
The purchaser’s attention is drawn to the following
To the extent permitted by law and subject to the Limited Warranty, and as part of the terms of the sale of the equipment or part thereof:
SP Tools shall not be liable for any form of loss, damage, cost, injury or harm of any kind (whether direct, indirect, special or
consequential) howsoever arising from the use or supply of the equipment to the purchaser.
The Warranty Period
12 months (1 Year)
Exclusions to Limited Warranty Policy
1.1 Fails due to an accident (including liquid spillage), abuse, misuse, neglect or normal wear and tear.
1.2 Has been used in a manner other than for which it was originally designed.
1.3 Has been tampered with or is otherwise than as supplied by SP Tools.
1.4 Where any damage, malfunction or other failure of the equipment or any part thereof resulted directly or indirectly from
unauthorized persons, adjusting or failing to adjust any part requiring normal maintenance and service. (Examples include
tightening of screws, nuts and bolts, the replacement of brushes or the correct storage of batteries).
1.5 Malfunctions due to the use of defective or incompatible accessories.
1.6 Is damaged by lightning or thunderstorm activity.
Claiming warranty
The Warranty may be claimed on in the following manner:
2.1
2.2
2.3
In order to make a claim under this warranty, the purchaser must deliver the equipment or
any part thereof to a repair agent and pay all costs of transportation.
The purchaser must deliver to the repair agent written reasons why the purchaser considers
that the purchaser has a claim under the warranty and must provide all necessary details,
including:
 The place, date and from whom the unit or part was purchased.
 The unit or part involved Model and Serial Number.
 The defect, malfunction or failure in respect of which the claim is being made.
If the warranty claim is valid, the repair agent will carry out repairs and return the product at
no charge to the purchaser. These repairs are limited to the warranty fault identified and as
such will not include any other faults due to misuse, abuse, failure to maintain, fair wear and
tear or the replacement of serviceable items such as brushes, bearings, batteries and the
like.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Note: After inspection units which have failed due to non-warrantable causes will be subject to freight, repair and or quote
charges.
5
THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) MUST BE RETAINED BY
THE CUSTOMER AS IT WILL BE REQUIRED IN THE EVENT OF A CLAIM FOR WARRANTY
BEING MADE.