Instructions / Assembly

© Office Star Products juin 2016
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu’à ce que les roulettes (2) s’encliquettent.
ÉTAPE 2 Fixez les bras (7L et 7R) au coussin du siège (5) avec trois rondelles plates (8) et trous vis du bras (9) pour chaque bras. SERREZ TOUTES LES VIS
VEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixez la plaque du siège (4) au coussin du siège (5) avec la flèche qui se dirige vers l’avant de la chaise en utilisant quatre vis du plaque du
siège (10). SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixez le support du dossier (12) à l’arrière de la plaque du siège (4) avec trois vis du dossier (11). SERREZ TOUTES LES VIS AVEC LA CLÉ
ALLEN (13)
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1). Placez le siège assemblé sur le vérin pneumatique (3) et mettez de la pression vers le bas.
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs.
or less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829’s with self-
adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
5
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To
lower seat height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, lift lever (2) up. Release
lever (2) to lock desired seat position.
• BACKREST ANGLE ADJUSTMENT
Push lever (3) back for free float. Push lever (3) forward to lock
backrest in position. To unlock, push lever (3) back and lean
back slightly to release lock.
• TILT TENSION ADJUSTMENT
To adjust tilt tension, Turn knob (4) clockwise to increase tension
and counter-clockwise to decrease or ease tension.
NOTE: Be careful not to loosen back tilt adjustment knob completely.
• ARM HEIGHT ADJUSTMENT
Push button (5) in to allow arms to move up or down freely,
release button (5) once the desired height is reached.
• ARM FLIP UP AND DOWN
To flip arms up, simply pull up on arm. To lower arm, simply pull
down on arm.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
529-M3R2N6F2
(not shown)
529-M3R2N6F2 / 529-ME3R2N6F2
R2 SpaceGrid BACK MANANGER’S CHAIR
ASSEMBLY INSTRUCTIONS
529-M3R2N6F2 / 529-ME3R2N6F2
FAUTEUIL DE DIRECTION À
DOSSIER EN R2 Space Grid
INSTRUCTIONS DE MONTAGE
STEP 1 STEP 2
STEP 4 STEP 5
STEP 3
X5
X4
X3
X3
X3
X3
X3
2
12
7R
1
3
8
9
11
4
5
PIÈCE QTÉ
1. Base ..............................1
2. Roulettes ...........................5
3. Vérin pneumatique ...................1
4. Plaque du siège ......................1
5. Coussin du siège .....................1
6. Dossier ............................1
7. Bras (7L et 7R) ......................2
8. Rondelles plates .....................6
9. Vis du bras ..........................6
10. Vis du plaque du siège ...............4
11. Vis du dossier ......................3
12. Support du dossier (pre-installed) .......1
13. Allen Wrench .......................1
9
13
8
7L
10
13
5
13
6
4
1
2
4
3
1
rear
front