Instructions / Assembly

FEATURE
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull
lever (1) up. To lower seat height sit on chair and
pull lever (1) up.
• SYNCHRO TILT
To lock return chair to the upright position and push
lever (1) in. To unlock pull lever (1) out.
• TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature. Turn knob (2)
clockwise to increase tension and counter-clockwise
to decrease or ease the tension.
NOTE: Be careful not to loosen back tilt adjustment
knob completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms
to move up or down freely. Release the button (3) once the
desired height is reached.
55-38N17/55-7N17
CHAISE PROFESSIONNELLE DE DIRECTEURS
DE DOS DE GRILLE D’AIR
INSTRUCTIONS DE MONTAGE
55-38N17/55-7N17
AIR GRID BACK PROFESSIONAL MANAGERS CHAIR
OPERATING INSTRUCTIONS
ÉTAPE 1 ÉTAPE 2 ÉTAPE 3
ÉTAPE 4 ÉTAPE 5
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur
la liste et s’assurer que les quantités des pièces reçues sont correctes.
ÉTAPE 1 Insérer les roulettes (2) dans la base (1). S’assurer que toutes les roulettes (2) sont
verrouillées en place. Placer la base (1) à la verticale de façon à ce que les roulettes (2) soient
par terre.
ÉTAPE 2 Attacher le plateau du siège (4) à l’assemblage du siège (5) en utilisant quatre vis
moyenne (8). Attacher les bras (7L et 7R) à l’assemblage du siège (5) en utilisant six vis longue
(9) et six rondelles (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS.
ÉTAPE 3 Insérer l’assemblage du dossier entre le siège relié (5) au plateau du siège (4). Les
attacher en utilisant trois courtes vis Allen (11). RESSERRER COMPLÈTEMENT TOUTES
LES VIS.
ÉTAPE 4 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le
dessus du vérin pneumatique (3).
Appliquer de la pression pour verrouiller le siège.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR RESSERRÉ
COMPLÈTEMENT TOUTES LES VIS.
PARTS .......................... QTY
1. BASE ...................................1
2. ROULETTE ............................... 5
3. VÉRIN PNEUMATIQUE .....................1
4. PLATEAU DU SIÈGE .......................1
5. ASSEMBLAGE DU SIÈGE ...................1
6. ASSEMBLAGE DU DOSSIER ................1
7. BRAS (7L ET 7R) ..........................2
8. VIS MOYENNE (PLATEAU DU SIÈGE) .........4
9. VIS LONGUE (BRAS)) ......................6
10. RONDELLES ............................6
11. VIS ALLEN COURTE
(ASSEMBLAGE DU DOSSIER) ..............3
12. CLÉ ALLEN .............................1
© Office Star Products Juillet 2008
1
1
55-38N17
55-7N17
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE
®
chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
 •Lifetimeoncomponentpartsincludingpneumaticcylinder,controlmechanism,baseandcasters.
 •3Yearsonupholsteryfabricandfoamagainstwearanddeterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons
weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may
result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of
this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year.
This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
1
2
4
5
8
6
1
7R
4
7L
10
9
10
9
5
6
12
11
5
3