User's Manual

System Introduction and Network Basics
1-7
Touch the MONITOR SETUP key to display a menu that enables you to adjust
tones, enter patient data, modify the screen format, set time and date, adjust
brightness, determine battery status (Ultraview 1030/1050 only), and specify
printing characteristics.
The UCW and Ultraview 1700 enable you to display a digital clock, stopwatch, or
timer in the lower right corner of the screen. Touch the clock to display the clock
menu. The Ultraview 1030, 1050, 1500, and 1600 monitors display a digital clock
at the bottom right of the screen. Refer to Bedside/Transport Monitors on page 5-3
and Central Monitors on page 6-3 for a detailed explanation of the functions that
apply to your system.
Touch the SPECIAL FUNCTIONS key to display a menu that enables you to view
remote parameters, activate automatic notification of remote alarms, view trends
of vital sign data and clinical and drug calculations, and use other optional network
applications.
When you touch the TONE RESET/ALM SUSPEND key once during an alarm
condition it will silence the alarms for 45-seconds at the unit where the key was
touched (bedside or central). Touching the key again during the initial 45-second
suspension will silence the alarms for 3-minutes at the bedside only. Refer to
Alarms on page 2-3 for more details.
You may use either a system printer or a printer module for recording patient data.
Recordings of monitored data can be generated by touching the RECORD key
and then touching up to four flashing parameter keys (depending on the printer
capacity). Refer to Printing on page 4-5 for more details.
Touch the PREVIOUS MENU key to move back one menu level. From the Main
Menu level, touch PREVIOUS MENU to remove the current menu from the
display and close the application window.
Touch the NORMAL SCREEN key to close any active application window, and its
menus, or to return to the basic display.
Using the Keyboard
A keyboard can be used for certain applications like Calculations and
Admit/Discharge. An on-screen keyboard is provided for all local applications, but
you may also use an external keyboard. Refer to Using the On-Screen Keyboard
on page 3-5 for keyboard displays. Use the arrow keys and TAB key on the
keyboard to move within an application window.
Using the Mouse
If your system is equipped with a mouse it may be used with selected functions in
lieu of the keyboard or touchscreen. Click the left mouse button on a menu key to
activate the key.
To customize your monitor:
1 Touch MONITOR SETUP.
2 Select any menu key.
To activate additional functions:
1 Touch SPECIAL FUNCTIONS.
2 Select any menu key.
To temporarily silence alarm
tones:
1 Touch TONE RESET/ALM
SUSPEND once to silence for
45-seconds.
2 Touch TONE RESET/ALM
SUSPEND again (within
45-seconds) to suspend alarms
for 3-minutes (bedside only).
To record a parameter:
1 Touch RECORD once.
2 Select up to four flashing
parameter keys.
To change the screen display:
1 Touch PREVIOUS MENU to
return to last menu.
2 Touch NORMAL SCREEN to
remove the menu from the
screen.