User's Manual

Printing
4-13
Printer Key Functions
Ultraview 1030/1050 Monitor, Bedside, and System
Printer Modules
Printer control keys for the bedside and system printer modules are located on the
module front. The printers can also be controlled by keys on the monitor itself.
Table 3: Key Descriptions
Key Function
SLOW
ON/OFF
Changes the print speed of waveform recordings to
6.25mm/second. Pressing SLOW a second time returns the
printer to the current system sweep speed. SLOW has no
effect on the print speed of non-waveform recordings (data
tables, graphics, etc.).
CONTINUE
• When the printer is off-line, press this key to feed roll
paper at 25mm/second or to feed one sheet of perforated
paper through printer module.
• When the printer is on-line and currently printing a 12- or
20-second waveform recording, press CONTINUE to
convert to a continuous recording. If you press
CONTINUE, the 12- or 20-second recording completes,
followed by a horizontal line, and then the current data.
The horizontal line appears even on recordings that are
not in a queue, but are the only request.
STOP
RECORDING
• Stops any printing currently in progress and moves to the
next print request in the queue.
• Stops any roll paper advance currently in progress.
PRINTER
ON/OFF
Takes the printer off-line without turning the power OFF.
Alarms and print requests are now ignored. An LED (located
either in the key or on the front panel of system printer)
illuminates when this function is selected.
To access printer control keys
from the monitor:
1 Touch NORMAL SCREEN.
2 Touch PRINTER CONTROLS.
3 Select the desired key.