User's Manual

Ultraview Care Network
5-6
Setting the Time and Date
The TIME/DATE key controls both the time and date menus. The current time or
date displays above the menu.
The time displays in either 12- or 24-hour format. Network monitors display the
network time; standalone monitors display the internal system time.
Touch ENTER to make the time/date change permanent in the system.
Using the System Clock
A system clock can be continually displayed in the lower right corner of the
screen. The clock feature may also be used as a stopwatch or timer.
Figure 5-2: Clock display formats
Activating the Screen Saver
Activating the screen saver blanks the screen (displaying only the Spacelabs
Medical logo). You may also disable the screen saver by touching the screen,
clicking (or dragging) the mouse, or pressing any key on the keyboard.
!
• Setting the time on any networked monitor sets the time for all
monitors on that network.
!
• The digital clock is available for all monitors.
• The stopwatch and timer are only available for the UCW and
Ultraview 1700.
!
• The screen will automatically be restored by an incoming alarm
condition.
• This feature is only available for the UCW and Ultraview 1700.
To change the network or
internal system time and date
(UCW and Ultraview 1700 only):
1 Touch MONITOR SETUP.
2 Touch PRIVILEGED ACCESS.
3 Enter Clinical password.
4 Touch TIME/DATE.
5a Select TIME.
-OR-
5b Select DATE.
6a Select 24-HOURS or AM/PM
(12-hour).
-OR-
6b Select MONTH, DAY, and
YEAR.
7 Use arrow keys to set time or
date.
8 Touch ENTER.
To access the clock menu:
1 Touch MONITOR SETUP.
2 Touch MONITOR
CONFIGURATION.
3 Select CLOCK ON.
4 Touch the clock that appears in
the lower right of the screen.
5 Select DIGITAL,
STOPWATCH, or TIMER.
digital timer
02 JUN 03
02 JUN 03 02 JUN 03
Elapsed
Remaining
stopwatch
To activate the screen saver:
1 Touch MONITOR SETUP.
2 Touch MONITOR CONFIG.
3 Touch ACTIVATE SCREEN
SAVER.