User's Manual

Ultraview Care Network
16-4
Display Detail
Temperature readings appear on the monitor screen as soon as you plug a
temperature probe into the module.
Figure 16-1: Temperature display
 Temperature parameter key
 Single channel temperature reading
 Temperature label
 High and low temperature alarm limits
 Two temperatures (T1/T2 or T3/T4)
 Delta temperature (DT)
 Status of temperature alarms
!
• When alarm limits are set on more than one temperature, the
alarm limits for only one temperature will be displayed. To view
the alarm limits, touch TEMP, then ALARM LIMITS, then select
the TEMP 1, TEMP 2, TEMP 3, TEMP 4, or DELTA TEMP key.
38.0
o
C
38.5
37.5
T
E
M
P

T
E
M
P
T1 ON
T2 ON
DT OFF
 
38.0
o
C
35.1
T1
T2
DT
2.9

T1
