User's Manual

Ultraview Care Network
12-6
Setting Up Respiration Monitoring
Refer to the Directory of Keys - Respiration on page 12-2 for a flow diagram of
respiration keys and menus.
Display Detail
Respiration appears on the monitor in the following format:
Figure 12-1: Respiration display

Respiration trace

Respiration parameter key

Respiration indicator (flashes once per detected breath)

Selected lead for respiration

Apnea alarm limit in seconds

High respiratory rate alarm limit

Low respiratory rate alarm limit

Current respiratory rate
!
• If the RESP ON/OFF key does not appear in the ECG Display
Format menu, your module does not include the respiration
option.
• The RESP key must be ON in the ECG Display Format menu to
display the RESP parameter key.
CAUTION:
• If you suspend ECG processing using the SUSPEND
PROCESSING key in the ECG menu, you also suspend
respiration processing.
To set up respiration monitoring:
1 Attach the patient ECG leads.
2 Plug the ECG cable into the
module’s ECG input.
3 Touch ECG.
4 Touch DISPLAY FORMAT.
5 Select RESP ON.
6 Touch RESP.
7 Select additional keys as
necessary.
R
E
S
P
APN 15s
RA-LA
20
15
*
18
20
15
 

