User's Manual

Ultraview Care Network
15-18
Figure 15-9: Twin fetal heart rates on same scale,
then shifted to separate scales
These messages print according to the following schedule:
Event Marker Functions
To mark an event on the strip chart recorder, touch the MARK key on the screen.
The recorder will print a black bar at the top of the heart rate scale. The monitor is
also equipped with an external Event Marker. When the external Event Marker is
pressed, the recorder prints an arrow at the top of the heart rate scale.
Table 1: Print Time Intervals
DATA ITEM TIME INTERVALS

Time and Date Every 5-minutes
 Recorder Speed 5-, 20-, 35-, and 50-minutes after the hour
 HR Mode 5-, 20-, 35-, and 50-minutes after the hour
 Uterine contraction mode 5-, 20-, 35-, and 50-minutes after the hour
 Monitor ID # 10-, 25-, 40-, and 55-minutes after the hour
Twin Shift (when selected) Every 10-minutes “HR2 add 30” prints
? (for signal coincidence) Upon detection




To mark an event on the fetal
strip:
1 Touch the MARK key.