User's Manual

Fetal Monitoring

15-23

Module Configuration Manager

The Module Configuration Manager feature provides the capability to define and

store all user-configurable options for the fetal parameter. Once configured, these

settings control its operation whenever the monitor is powered ON.

Display Detail

The User Settings screens list all user-configurable options. From these screens

you can change and store the options in your monitor.

Figure 15-15 illustrates the User Settings screen which is used to change and

store fetal rate alarm limits.

The parameter configuration table in this chapter lists all available options, the

available user settings, and the factory defaults for each parameter.

Figure 15-15: User settings

 CURSOR ↑ and CURSOR ↓ keys scroll through the two columns of

parameters on the screen.

 ↑ and ↓ keys scroll the list of valid settings for the highlighted parameter.

 PREV PAGE key returns to the previous screen.

 NEXT PAGE key advances to the next screen.

 PRINT PAGE key prints the current screen.

 STORE key stores the currently selected settings as defaults.

PARAMETER DESCRIPTION VALUE PARAMETER DESCRIPTION VALUE

FETAL RATE ALERT OFF ECG RATE ALARMS (INFANT) NO SHIFT

• HIGH RATE 180 TOCO SENSITIVITY MEDIUM

• LOW RATE 84 ECG PLOT ON

FETAL ECG WAVEFORM ON ECG EDIT OFF

• FECG WAVEFORM SIZE 1.00 EXTERNAL DEVICE NONE

• FECG SWEEP SPEED 25 PRINT PERIOD 10

Enable/Disable Fetal Rate Alert



STORE

SELECT PARAMETER

CURSOR

CHANGE VALUE

PAGE X OF X

PAGE