User's Manual

Ultraview Care Network
25-8
Creating a New Entry
Touch the NEW ENTRY key to create a new record for the current day and time
and to add the record to the Calculations table. The new record is positioned
immediately to the right of existing records. If all the columns on the screen are
filled, the display shifts to the left and the new record is displayed in the far right
column.
The new record’s DAY/TIME key is highlighted and contains the current day and
time. The available input values are displayed in the input column and calculated
results appear in the output column. Any unavailable inputs or outputs are
displayed as question marks.
NEW ENTRY does not function when a total of 200 records exist in all the
Physiologic calculations tables for the selected system. If you want to make
further entries, you must first delete some of the existing entries from one or more
of the calculations tables.
Editing Inputs
Each type of calculation displays its own Edit Inputs menu containing the inputs
listed in the upper part of the Calcs table. The name of the input and units of
measure appear on each EDIT INPUTS key for the Physiologic calculations. Once
an input has been edited, the letter e is displayed immediately after the edited
value in the table.
When you select an input key, the on-screen keypad appears. Refer to Using the
On-Screen Keypad (Ultraview 1030/1050/1500/1600 only) on page 3-7 for on-
screen keypad operating instructions.
If you enter a height and weight in the BSA menu, the system automatically
computes a BSA. However, changing the BSA directly invalidates any height or
weight previously entered.
!
• Touch NEW ENTRY, then touch STORE ENTRY to store the
entry in the database. Entries that have not been stored remain
in the table until you select a different bed or patient, then they
disappear.
!
• The displayed units for pressure values, height, and weight may
vary based on your monitor's configuration. Contact your
system administrator for details.
!
• Changing the height and weight in the BSA menu does not
affect the height and weight in the Admit/Discharge menu.
To create a new entry:
1 Access Local or Remote Calcs.
2 Touch NEW ENTRY.
3 Touch EDIT INPUTS to input
new data not available in the
system.
4 Select an input key.
5 Use the on-screen keypad to
input the value.
6 Touch ENTER on the on-
screen keypad.
7 Touch PREVIOUS MENU.
8 Touch STORE ENTRY to
retain entry in Calcs table.
To edit a record:
1 Access Local or Remote Calcs.
2 Touch EDIT INPUTS.
3 Select an input value to edit.
4 Use the on-screen keypad to
change the input value.
5 Touch ENTER on the on-screen
keypad.
6 Touch PREVIOUS MENU, then
STORE ENTRY to retain entry
in Calcs table.