User's Manual

Trends
26-5
The messages “No trends available for this bed” or “Trend data not available”
appear when trend data has yet to be accumulated for the selected bed.
Tabular Trends Display
You can view a tabular trend of continuous patient data and episodic patient data
acquired within the last 24-hours by touching the TABULAR TRENDS key.
Figure 26-2: Tabular trends display
 Bed identification
 Patient name
 Times that data was collected
 Date of tabular trend
 Trended data
 Unit of measure for each parameter
 List of parameters
Parameters always appear in descending order of priority. Data that is monitored
on a continuous basis always precedes episodic data. Episodic values are
presented according to the sequence in which they were originally stored. Data
older than 24-hours is not displayed.
Calculations data does not appear in tabular trends.
Printing the Trend Display
You can print a copy of the displayed graphic trend or tabular trend at any time.
!
• When using a 2-channel printer, the top and bottom half of the
trend display print consecutively.
Bed: 220 Patient: SMITH, JOHN Date: 18 JUN 2003 CURRENT
Time 05:30 06:00 06:30 07:00 07:30 08:00 08:30 09:00
HR(ECG) b/min 70 75 82 67 76 85 72 77
ABN b/min0 0 0000 0 0
RR(RESPbr/min814998814 14
ART/s mmHg 165 137 165 165 165 165 137 138
MAP mmHg 136 136 136 136 136 136 108 109
ART/d mmHg 108 80 108 108 108 108 80 81
  

To print the trend display:
1 Adjust trend display as desired.
2 Touch PRINT.