User's Manual

27-7
Remote Keypad Troubleshooting Guide
Clinical Situation Possible Cause Solution
Monitor accepts
commands from any
keypad
■ Monitor operating in an unsecured
mode.
■ Select an access code and program
both the monitor/receiver and the
keypad to that code.
During programming,
another receiver was
inadvertently changed
■ Remote keypad placed too close to
another monitor’s receiver.
■ Move the keypad directly in front of
the receiver to be programmed and
place your finger over the keypad
window during programming.
Monitor does not respond ■ Monitor may not support remote
keypad.
■ Press the ACCESS CODE key.
If an A is not displayed (below the
NORMAL SCREEN key), contact
your system administrator or biomed.
■ Depleted battery in remote keypad. ■ Replace battery in remote keypad.