User's Manual

Patient Data Logger
29-5
Display Detail
The Patient Data Logger report is automatically sent to an external device, such
as a printer or terminal, once the serial port is assigned and toggled ON.
The data fields that appear on this report (ECG, RESP, ART, SpO
2
, and EtCO
2
)
will vary depending on the parameter modules installed on the system.
Figure 29-1: Patient Data Logger report sample
SPACELABS MEDICAL PATIENT DATA LOGGER
PATIENT NAME DOE, JOHN Bed # 01 DATE 08 JUN 2003
ECG RESP ART mmHg SPO2 EtCO2
TIME HR ABN LEAD LEAD2 ST1 ST2 RATE SYS/DIA MEAN % RESP % AGENT %
14:55:49 212 0 VI II 2.08 -2.00 52 138/81 109 93 0 0.1 HAL 0.0
14:55:54 158 0 VI II 2.08 -2.00 47 138/81 109 95 0 0.1 HAL 0.0
14:55:59 146 0 VI II 2.08 -2.00 39 138/81 110 96 0 0.1 HAL 0.0
14:56:04 146 0 VI II 2.08 -2.00 36 138/81 110 97 0 0.1 HAL 0.0
14:56:10 212 0 VI II 2.08 -2.00 47 138/81 109 97 0 0.1 HAL 0.0
14:56:15 200 0 VI II 2.08 -2.00 53 138/81 110 97 16 5.2 HAL 0.1
14:56:20 146 0 VI II 2.08 -2.00 43 138/81 110 97 16 5.2 HAL 0.1
14:56:25 146 0 VI II 1.84 -2.56 36 138/81 109 97 16 5.2 HAL 0.1
14:56:30 211 0 VI II 1.84 -2.56 43 138/81 110 97 16 5.2 HAL 0.1
14:56:35 212 0 VI II 1.84 -2.56 53 138/81 110 97 16 5.2 HAL 0.1
14:56:45 146 0 VI II 1.84 -2.56 36 138/81 110 97 16 5.2 HAL 0.1
14:56:52 200 0 VI II 1.84 -2.56 39 138/81 109 79 16 5.2 HAL 0.1
!
• All lines on this report are terminated by a line-feed, carriage-
return combination.
• Lines may wrap if the line length exceeds the display or printer
width.
• The report prints a maximum of 132 characters per line and
2 lines per entry.
• The report prints data from a maximum of 11 parameter groups
(for example, ECG, RESP, ART, etc.). (Fewer parameters are
printed if the line length limit is reached.)