User's Manual

Ultraview Care Network
21-4
CAUTION:
• Although the 90516 capnograph module detects and
reports apnea conditions, it is not intended to be a primary
diagnostic apnea monitor and/or apnea recording device.
• Use only Spacelabs Medical sensors with this monitor.
Other sensors may plug in, but will not operate.
• Use only Spacelabs Medical airway adapters with
Spacelabs Medical sensors. The monitor may not function
if other airway adapters are used, and sensor damage may
result.
• If the patient’s airway is configured with a closed
suctioning system, make sure the airway adapter is placed
close to the suctioning system (on the ventilator side). This
will help ensure that the sampling adapter is not impaired
during and after suctioning.
• U.S. Federal law restricts this device to sale by or on the
order of a physician.
!
• If your module is equipped with the Module Configuration
Manager feature, you can define your own default settings for
such characteristics as alarm limits and display configuration.
Refer to Module Configuration Manager on page 7-5 for further
details.