User's Manual

071-0774-00 Rev. A 3-11
SpO
2
Troubleshooting Guide (continued)
Clinical Situation Possible Cause Solution
No SpO
2
alarms are
displayed
■ ECG “Leads Off” condition exists
■ Higher priority alarm condition is
present
■ Re-attach ECG lead wires to patient and
resume ECG monitoring to clear
pending ECG alarms
■ Clear current alarm condition and/or
reprioritize SpO
2
alarms of interest in the
Module Configuration Manager
■ When SpO
2
alarms are set ON, all SpO
2
alarm conditions will cause the
parameter value (or ???) to blink
according to the alarm priority set by
using the Module Configuration Manager