Product Information Guide

MODEL ESP-VERTICAL
CENTRAL AIR CONDITIONING
HEAT PUMP SYSTEM
2 to 5 Tons
One-piece blower unit with DX coil
Standard Fan Coil Features
• Fully-insulated, corrosion-resistant cabinet with baked enamel
finish, 1-1/2 lb. density batt
• Six-row copper tube aluminum fin evaporator coil removes up to
30% more humidity than conventional coil
• Blower motor is factory-balanced for vibration-free performance
• Condensate drain connection in base pan for specially-designed,
factory-supplied condensate drain assembly
• Factory-assembled, pre-wired control center with high and low
voltage terminal blocks, blower relay and low voltage transformer
• Factory-installed anti-frost control and thermal expansion valve
• Standard factory-installed primary drain pan float switch
• Sweat-type water line connections
• All connections located on same side of unit
• Meets or exceeds DOE standards for energy efficiency
• Visit www.ari.org to identify compatible condensing units and
view associated performance/efficiency ratings
MODEL Height Width Length
ESP-2430V 33" 24" 16-1/8"
ESP-3642V 33" 33" 16-1/8"
ESP-4860V 33" 43" 16-1/8"
FAN COIL UNIT DIMENSIONS
SPECIFICATIONS
5
NOTES: Electrical characteristics 208-230/1/60. For cooling capacity and SEER rating when mated with a specific condensing unit, check the ARI directory at www.ari.org.
TOTAL COMFORT, WHOLE-HOUSE HEATING and COOLING SYSTEM
For supplemental electric or hydronic heat modules see page 9.
Std. CFM
Connections
Recommended
@
Motor F.L. Suction Liquid
Ship
Condensing UnitCool
Wt.
Model Nom. Tons MBH 1.5" W.C. HP Amps Line Line (lbs.) Capacity (MBH)
ESP-2430V 2 23.0 550 1/3 1.8 7/8" 3/8" 98 24
2-1/2 27.6 550 1/3 1.8 7/8" 3/8" 98 30
ESP-3642V 3 35.0 850 1/2 2.8 7/8" 3/8" 120 36
3-1/2 40.0 850 1/2 2.8 7/8" 3/8" 120 42
ESP-4860V 4 48.0 1150 1 3.6 7/8" 3/8" 145 48
5 57.0 1150 1 3.6 7/8" 3/8" 145 60
Nominal System
Capacity