User's Manual

OPTIONAL: If you have the optional remote control system, set the slide switch on the side of the
transmitter to the “UP” position and press the #5 button on the side of the keyfob transmitter to enter the #1
setting into the remote control system. The main control panel display will flash slowly four times to indicate
remote control setting #1 was successful.
After ALL programming is complete, return the DIP switches to the “ON” position to activate
the air pressure presets.
To Program air pressure setting #2: This air pressure preset is only accessible from the optional remote
control keyfob transmitter. This air pressure setting is typically adjusted to set the vehicle at a lower ride
height for parking.
1. Place the DIP-switches located on the side of the computer box in the OFF [“up”] position
2.Turn ignition ON
3. Set desired air pressure of the vehicle with main control panel switches
4. Press the “program” button, located on the side of the computer box 6 times … the led beside the
program button will then flash.
5. Set the slide switch on the side of the transmitter to the “DOWN” position and press the #5 button
on the side of the keyfob transmitter to enter the #2 setting into the remote control system. The main
control panel display will flash quickly four times to indicate remote control setting #2 was successful.
After ALL programming is complete, return the DIP-switches to the “ON” position to activate the
air pressure presets.
NOTE: The vehicle will return to the #1 air pressure preset every time the vehicle is started. If you DO NOT
wish to use the air pressure preset feature, simply leave the DIP switches in the “OFF” [UP] position.
How to operate the RidePro E system
The main control panel display contains the switches for inflating or deflating the individual airsprings. The
position of the switches correspond to the position of the airsprings in your vehicle. NOTE: The control
panel is functional ONLY when the key is “ON”. It is disabled when the key is “OFF”. The optional remote
control system is functional ONLY when the key is “OFF”.
Control Panel:
Top Left Switch: Controls left front ride height UP or DOWN
Indicates Air Pressure of left front air bag
Top Right Switch: Controls right front ride height UP or DOWN
Indicates Air Pressure of right front air bag
Bottom Left Switch: Controls left rear ride height UP or DOWN
Indicates Air Pressure of left rear air bag
Bottom Right Switch: Controls right rear ride height UP or DOWN
Indicates Air Pressure of right rear air bag
Optional Remote Control Transmitter:
Button 1 (LF): Controls left front ride height UP or DOWN
Button 2 (RF): Controls right front ride height UP or DOWN
Button 3 (LR): Controls left rear ride height UP or DOWN
Button 4 (RR): Controls right rear ride height UP or DOWN
Button 5 (side of transmitter): Activates air pressure presets
Slide Switch UP: Controls buttons 1-4 ride height UP and controls level #1 setting
Slide Switch DOWN: Controls buttons 1-4 ride height DOWN and controls level # 2 setting