Portable System Owners Manual Customer Service Center • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. REQUIRED TOOLS AND MATERIALS: WARNING! • (2 each) Wrenches and/or Socket Wrenches and Sockets. READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT. 1/2" FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. 3/4" AND/OR 1/2" 3/4" Manufactured & Distributed By: Model # A Company Toll-Free Customer Service Number for U.S.
NOTICE TO ASSEMBLERS ALL Huffy Sports basketball Systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system. SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
PARTS LIST Item Qty. Part No.
WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • During play, especially when performing dunk type activities, keep player's face away from the backboard, rim and net. Serious injury could occur if teeth/face come in contact with backboard, rim or net.
PARTS IDENTIFIER- Hardware is actual size 32. Bolt, Hex Flange, 5/16-18 x 2"-Qty (4) 13. Bolt, Carriage, 3/8-16 x 1.5 Long-Qty (1) 16. Bolt, Carriage, 5/16-18 x 1.75 Long-Qty (2) 22. Washer, .406 I.D. x 1.0 O.D.-Qty (3) 25. Nut, Hex Flange, 5/16-18-Qty (4) 7. Nut, Hex Flange, 3/8-16-Qty (1) 23. Bolt, Carriage, 5/16-18 x 4 Long-Qty (2) 10. Spacer, Wheel Axle-Qty (2) 31. Washer, 5/8 I.D. x 1/2 O.D.-Qty (1) 30. Special Nut-.-Qty (1) 27. "T" Bolt-Qty(1) PARTS IDENTIFIER- Not actual size 9.
Get to know the basic parts of your basketball system..... BOARD RIM POLE BASE WHEEL CARRIAGE ASSEMBLY P/N 21173402 12/28/04 6 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 http://www.huffysports.
1. Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step. Reference Stickers 4 5 6 TOP Toll-Free Customer Service Number for U.S. : 1-800-558-5234 http://www.huffysports.
IMPORTANT! ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART 2. Align poles using alignment marks. First, pound top and middle poles together by bouncing them on a scrap piece of wood on the ground as shown in FIG B. until they no longer move toward pole identification stickers. THEN add bottom pole section and pound together in the same way. alignment mark TOP CAUTION! 4 THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE.
3. Install wheel axle (2) through wheel bracket (9) and install wheels (3) onto wheel axle (2) with spacers (10) as shown. IMPORTANT!: 9 2 3 10 THE SPACER (10) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE. 4. Attach wheel carriage assembly to base (1) with bolt (13), washer (22), and nut (7) as shown. FINGER TIGHTEN - NO TOOLS REQUIRED. Assembly will be fully tightened in next step.
5. Attach pole assembly to tank assembly as shown. Secure pole assembly to tank and wheel bracket by turning the pole assembly clockwise as shown. Tighten pole completely and further rotate pole until struts are aligned correctly as shown in FIG B. WARNING! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. IMPORTANT!: The pole should be turned approximately 7 complete rotations to tighten properly.
6. Rotate struts down and bend struts outward to line up with holes on base as shown. Secure free ends of tank struts to tank with carriage bolt (16), washer (22), and knob (17) as shown. Repeat for other side. WARNING! KNOBS MUST BE TIGHTENED COMPLETELY AND CHECKED PERIODICALLY FOR TIGHTNESS. 16 22 17 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 http://www.huffysports.
7. Mount brackets (20 & 26) to backboard and finger tighten as shown. NOTE: Final adjustments will be made in Step 10. 26 27 32 27 25 24 26 20 P/N 21173402 12/28/04 12 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 http://www.huffysports.
8. Install Slam Jam Rim to Backboard A • B • Fit rim (18) securely into bracket (26) as shown (Allow "T"-bolt (27) to slip through center hole in rim (18). Install reinforcement bracket (28) onto “T” bolt (27) as shown. C • Install spring (29) onto “T” bolt (27) as shown. D • Install special nut (30) and washer (31) onto “T” bolt (27). E • Tighten nut (30) until flush with end of “T” bolt (27). B A 28 18 27 #28 27 26 30 C 31 D 29 27 27 31 E 30 Toll-Free Customer Service Number for U.
9. Support pole and tank assembly over support table. Carefully slide backboard components onto pole. WARNING! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP OVER. 10. SAWHORSE OR SUPPORT TABLE While still in the horizontal position, carefully slide backboard components onto pole.
11. Place assembled unit in desired location. Fill tank with water (26 gallons/98.4 liters) or sand (approx. 360 lb./163 kg) and snap tank cap (14) in place. Insert T-strap (11) through slot on back of base as shown. Secure unit to ground by twisting tie down stake (21) into ground and hooking T-strap (11) onto tie down stake (21). CAUTION! ADD TWO GALLONS (7.6 LITERS) OF NON-TOXIC ANTIFREEZE IN SUBFREEZING CLIMATES. 11 21 11 14 21 11 Toll-Free Customer Service Number for U.S.
12. Attach net clips to rim as shown. WARNING! CLIP “ARM” USE OF THIS PRODUCT WITHOUT PROPER INSTALLATION OF SMART CLIPS®, OR WHEN ALL SMART CLIPS® ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE TO FOLLOW DIRECTIONS CAREFULLY. 19 A 19 CLIP “BODY” Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows. Push second “arm” back and into ram as shown.
13. Install net. SIDE VIEW NETCLIP NET Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip. NETCLIP NET Toll-Free Customer Service Number for U.S. : 1-800-558-5234 http://www.huffysports.
14. Attach height and moving label (15) to front of pole as shown. Regulation rim height is 10 feet. HEIGHT ADJUSTMENT Rest unit on support table. Remove adjustment knobs (A) and carriage bolts (B) to extend or retract backboard and rim. Height adjustment from 7 1/2’ to 10’. A WARNING Backboard may rotate during height adjustment. CAUTION! B WARNING Do not adjust height of system in upright position. System must be in down position to adjust MOVING SYSTEM 1.