Datasheet
NETWORK KIT INSTALLATION
www.span.io REV. 2022-01-14
The Network Kit (PN 1-00921-xx) is required to connect multiple Span panels together
The router has been specially congured to have an IP of 192.168.50.1
The router leases an IP to connected devices within a certain DHCP range (192.168.50.x
See the Multi-Panel Application Note for full installation details
PoE in
PoE in
home router
home router
Span Panels
Span Panels
eth1 - eth4
eth2 - eth5
2. Connect “PoE in” to the home internet route
1. Connect the Network Kit router to power with the provided 120V plu
Note: You may receive functionally identical hardware from dierent brands. Follow diagram for the Network Kit box you recieve.
5. For the breaker powering the Networking Kit,
in the Span Installer App select
This circuit contains essential network /
monitoring devices
4
. Connect to the Span Panel
standard Ethernet port,
not
the
Aux
Comms
dongle
3
. Connect the Span Panels (and other devices) to any of the remaining ports