Install Manual
17SPAN Drive Installation Manual Installation |
8. Commissioning
SPAN Drive must be congured with the
SPAN Installer App prior to use.
Download the SPAN Installer App from:
span.io/span-apps
7. Final inspection
& closing the unit
Conrm that all connections are correct, properly
grounded, and secure.
Reassemble SPAN Drive by attaching the lower plastic
cover and glass cover back onto the device using
a #2 Phillips screwdriver. Do not over-tighten
the screws.
Drape the charging cable around your charger
and dock your EV connector in the holster.
Only after fully replacing the lower plastic cover
and glass cover, restore power.