Material Safety Data Sheet

Copper foil tape MSDS
1. Tape and supplier information
Tape name: copper foil tape
Supplier: Zhuhai Huayuan electronics Co.,Ltd
Contact NO.0756-3817709 / 3827709
FAX0756-3817719 / 0756-6116539
2. Material composition
Main material CAS NO. Concentration range
Name
chemical
formula
content
%
TWA ATEL CEILING
copper CU 96
07440-50-
8
None None None
3. Hazard identification
Main
Hazar
d and
effect
Health hazard effect: large particles can produce stimulation to eyes due to friction, eat a lot of dust
can cause friction thrill of stomach and intestine.
Environment hazard: NON
Physical and chemical hazard: quick response of combustible material, wet copper powder in the
air can be ignited, combustible dust, and water, strong acid, strong salt or alcohols, amines
exposure will release flammable hydrogen gas, with a number of inorganic and organic chemicals
are intense or explosive reaction.
Special hazard: NON
The main symptoms: irritation, lung tissue trauma of (cellulose lung tissue disease) dyspnoea, cough,
lethargy, decreased appetite, shortness of breath.
Items Hazard Classification: 4.3 (water-based substance ban)
4. First aid measures
First aid methods for different exposure pathways:
1. Inhalation: (1) the removal of pollution or the victim to fresh air. (2) a doctor immediately.
2. Skin contact: Light Shidiao quickly attached to the skin of the copper.
3. Eye contact: (1) open eyes, rinse immediately with warm water 10 minutes to ease, (2)
immediate medical attention.
4. Ingestion: (1) if the patient is about to or has lost consciousness, not feeding, (2) Do not
induce vomiting. (3) to the patient to drink 240-300ml of water to dilute stomach
substances. (4) the hospital immediately.
The most important symptoms and reactions: due to friction and irritation.
For emergency personnel protection: Class C should wear protective equipment in a safe area first aid.
Tips for Physicians: None
5. Fire-Fighting Measures
Suitable Extinguishing Media: (1) a small fire: sand, talc, sodium chloride. (2) fire: Isolate fire and allow it to
continue to burn until finished.
Special hazards that may be encountered when the fire: (1) the formation of explosive mixtures in air dust

Summary of content (4 pages)