Datasheet

QuickLogic EOS S3 Ultra Low Power multicore MCU datasheet - Version 3.3d 27-129
© 2020 QuickLogic Corporation www.quicklogic.com 107
11.4.3. Output Rise/Fall Time (VCCIO = 3.3V)
Table 45: Output Rise/Fall Time (SR = 1, VCCIO = 3.3V)
Transition D[1] D[0] C
LOAD
Min. Typ. Max. Units
Rise Time
PAD↑ (10% to
90%)
0 0 2pF 0.63 0.86 1.42 ns
0 1 5pF 0.57 0.93 1.57 ns
1 0 10pF 0.64 1.04 1.76 ns
1 1 20pF 0.88 1.36 2.25 ns
Fall Time,
PAD↓ (90% to
10%)
0 0 2pF 0.59 0.78 1.32 ns
0 1 5pF 0.52 0.81 1.37 ns
1 0 10pF 0.61 0.92 1.53 ns
1 1 20pF 0.82 1.19 1.94 ns
Table 46: Output Rise/Fall Time (SR = 0, VCCIO = 3.3V)
Transition D[1] D[0] C
LOAD
Min. Typ. Max. Units
Rise Time
PAD↑ (10% to
90%)
0 0 2pF 0.66 0.97 1.59 ns
0 1 5pF 0.72 1.08 1.81 ns
1 0 10pF 0.90 1.37 2.23 ns
1 1 20pF 1.14 1.74 2.83 ns
Fall Time,
PAD↓ (90% to
10%)
0 0 2pF 0.62 0.91 1.48 ns
0 1 5pF 0.68 0.96 1.60 ns
1 0 10pF 0.88 1.52 2.05 ns
1 1 20pF 1.10 1.61 2.53 ns
Power Consumption
Table 47 through Table 50 show power consumption measurements performed on the EOS S3 reference design board.
Developers can expect to measure similar current values at 25 C. Refer to the power optimized schematic available from
QuickLogic.
Table 47: Shutdown Current
a
VDD 1.1V 1.0V Units
Shutdown LDO Bypass (with
external voltage supplied)
12.1 10.5 µA
Shutdown with on-chip LDO
Mode
b
19.0 16.0
a. Device bootup and initialization should be at 1.1V.
b. LDO mode with maximum output current at 1mA.