Data Sheet

ams Datasheet Page 5
[v1-01] 2017-Mar-17 Document Feedback
AS7262 − Absolute Maximum Ratings
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. These are stress
ratings only. Functional operation of the device at these or any
other conditions beyond those indicated under Electrical
Characteristics is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device
reliability.
The device is not designed for high energy UV (ultraviolet)
environments, including upward looking outdoor applications,
which could affect long term optical performance.
Figure 5:
Absolute Maximum Ratings of AS7262
Symbol Parameter Min Max Units Comments
Electrical Parameters
V
DD1_MAX
Supply Voltage VDD1 -0.3 5 V Pin VDD1 to GND
V
DD2_MAX
Supply Voltage VDD2 -0.3 5 V Pin VDD2 to GND
V
DD_IO
Input/Output Pin Voltage -0.3 VDD+0.3 V Input/Output Pin to GND
I
SCR
Input Current
(latch-up immunity)
± 100 mA JESD78D
Electrostatic Discharge
ESD
HBM
Electrostatic Discharge HBM ± 1000 V JS-001-2014
ESD
CDM
Electrostatic Discharge CDM ± 500 V JSD22-C101F
Temperature Ranges and Storage Conditions
T
STRG
Storage Temperature Range -40 85 °C
T
BODY
Package Body Temperature 260 °C
IPC/JEDEC J-STD-020
The reflow peak soldering
temperature (body
temperature) is specified
according to IPC/JEDEC
J-STD-020 “Moisture/Reflow
Sensitivity Classification for
Non-hermetic Solid State
Surface Mount Devices.”
RH
NC
Relative Humidity
(non-condensing)
585%
MSL Moisture Sensitivity Level 3
Maximum floor life time of
168 hours
Absolute Maximum Ratings