Manualshelf

User's Manual

ManualsBrandsSparkLAN Communications ManualsElectronicsWireless 11a+g Dual-Band Access Point
12345678910
User’s Guide
7
Rear Panel
The rear panel features 1 Ethernet port, Reset button and Power port. Refer to the following table for the meaning of
each feature.
RESET Button
The RESET button can restore device to factory default settings by press this button for approx. 10
seconds during device power on status.
Ethernet
The port connects the AP to your networked PCs and other Ethernet network devices.
Power
The POWER port is where you will connect the power adapter.
AP Default Settings
User
Password admin
IP Address 192.168.1.250
Subnet Mask 255.255.255.0
RF ESSID A band: wlan-a G band: wlan-g
Channel A band: Auto G band: 6
Mode G band: Mixed
Encryption Disabled
DHCP Server Enabled
RESET
Ethernet
Power