User's Manual

EXT 1824G User’s Manual 2. Introduction
EXT 1824G-UM-COM-EN-03 17
Wireless Connection
• EXT 1824G wireless detector transmits images and data by wireless communication.
• A battery pack should be installed in the detector to use it under the wireless configuration.
• Up to 2 battery packs can be charged simultaneously from a battery charger.
- Use of multiple WLAN devices within the same frequency band may cause interference within
each wireless communication and slow down the transmission speed
- Do not cover or block the wireless module of the detector. Otherwise, the transmission speed or
operable distance may reduce.
Wired Connection
• Connect EXT 1824G wireless detector with the DATA(LAN) cable to make a wired configuration.
• As the power cable supplies power, a battery pack is needed to be inserted in the detector.
The wired connection is more suitable for stabilized communication
 The data communication is faster than the wireless connection.
 It enables the battery pack to be continously supplied with power while using the detector.
 The time for charging and replacing the battery pack can be reduced drastically.
EXT 1824G Wireless system consists of detector, CDs and relevant accessories. (Refer to chapter 3-1 “Product
Components” for CD information)
Table 2.1. EXT 1824G Packaging: Default components