User's Manual

EXT 1824G User’s Manual 4. Detector Component
EXT 1824G-UM-COM-EN-03 26
4.2.2.3. Charging Battery Pack
The battery pack supplies power to the detector during wireless connection.
Be sure to use only the dedicated battery pack, and fully charge it before usage.
• Connect the power adapter to the DC Input port of the battery charger. The power LED lights in blue indicates the
presence of direct current (DC) power.
• Insert the battery pack into the battery charger. Charging starts automatically. The charge LED lights appear
green when the battery pack is being charged. When battery pack is completely charged, all levels of chare LEDs
will illuminate.
• Gently pull the charged battery pack to remove from the battery charger.
WARNING
Securely plug the power cord into the power source. If contact failure
occurs, or if dust or metal objects come into contact with the exposed metal
prongs of the plug, fire or electrical shock may occur.
CAUTION
Be sure to stop charging the battery pack when the charge LED lights
appear in green beyond the specified charging time. Not doing so may result
in battery pack overheating or smoke emission, or battery explosion or fire.
CAUTION
You must use the power adaptor that is certified with IEC 60950 or IEC
60601-1.
Two batteries can be charged at the same time.
It takes approximately two hours to fully charge a battery pack. The required
charging time may vary depending on the temperature and remaining
battery level.