User's Manual

EXT 1824G User’s Manual 4. Detector Component
EXT 1824G-UM-COM-EN-03 28
4.3. Interface
4.3.1. WIFI Specification
Table 4.3. WIFI Specifications
Item Wireless Module
Standard IEEE 802.11abgn (2T2R)
Data Rate 802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: 300Mbps
Operating Frequency
IEEE 802.11abgn ISM Band, 2.400GHz ~ 2.4835GHz,
5.150MHz ~ 5.825MHz
*Subject to local regulations
Interface USB
Antenna 2 x UFL connector or printed antenna for 2T2R
Modulation
802.11b: DSSS (DBPSK, DQPSK, CCK)
802.11a/g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Power Consumption:
Continue TX: Max 450mA@2TX / Continue RX: Max
175mA@2RX
Security 64/128-bits WEP, WPA, WPA2, 802.1x
Operation Range
Depending on the customer’s design.
Sensitivity
802.11g:
≦
-74dBm
802.11n/2.4GHz:
≦
-72dBm(HT20),
≦
-69dBm(HT40)
802.11a:
≦
-71dBm
802.11n/5GHz:
≦
-71dBm(HT20, HT40)
* The WUBR-508N is powered by Ralink radio chip and features 2R2R 11abgn MIMO technology for higher
throughput performance, reiability and range. It is designed to meet the demading performance requirements
of critical embedded applications and supports the following features:
-. Ralink RT5572
-. Antenna: U.FL * 2 for 2T2R
-. Data Rates: allows link speeds up to 300Mbps.
-. Support Windows XP, Vista, Win7, Linux driver
* Detectors only provide 5150-5250MHz range in wireless mode. It is not available to adjust other channels.