User's Manual

EXT 1824G User’s Manual 4. Detector Component
EXT 1824G-UM-COM-EN-03 37
5.2.2. Operating Detector
1) Turn on the detector
Press and hold the POWER button
(approx. 2 second )
Ready lamp (Green) lights up first time
Ready lamp(Orange) lights up,
as OLED window shows up Booting information
(In approx. 1 minute)
2) Register the detector and make connection to the detector control system
i. Registration
AP(Blue) blinks
When the AP lamp is blinking 1 time in 2seconds,
system is in wired mode status.
When the AP lamp is blinking 2 times in 2seconds, system is in wireless mode (AP_1) status.
When the AP lamp is blinking 3 times in 2seconds, system is in wireless mode (AP_2) status.
When the AP lamp is blinking 4 times in 2seconds, system is in wireless mode (Inside AP) status.
When the AP lamp is blinking 5 times in 2seconds, system is in wireless mode (CR mode) status.
**User can set value of AP_1, AP_2, in Ecali Program. Please refer to Operation Manual for Ecali1
(Calibration tool).
ii. Connection
Network connection between the internal wireless
module of the detector and the wireless access point /
detector control system is secured automatically.
3) Conducting Examination
For details about operation, refer to the Operation Manual for the ECali1
i. Select the exam information or protocols
on the screen and start the examination.