User's Manual

EXT 1824G User’s Manual 7. Device Setting
EXT 1824G-UM-COM-EN-03 56
7.2. Detecting Setting
7.2.1. Detector Configuration
For details about each parameter, refer to the Operation Manual for ECali1
Start up ECali1. Click Option → Configuration → Detector Tab.
Menu Description
Path to save map files Register each map file that corresponds to the product
Pre-processing
Value for pre-processing.
Do not change it by yourself.
Serial number Register the serial number of product.
Router IP
IP address of AP.
The detector can not be connected to AP if router IP is changed.
Grid selection Select type of the grid and register the path of grid filter.
Exposure mode Choose exposure mode
Wired/Wireless Choose communication mode
Image mode Select image mode
Power management
Waiting time for sleep mode can be adjusted by setting parameters below.
1) Acquisition sleep time
Mode is changed from acquisition mode to sleep mode, after the set waiting time.
2) Deep sleep time
Mode is changed from sleep mode to deep sleep mode, after the set waiting time.
Hardware setting
AP button on detector is activated if Enable AP Button is checked.